Contributions to internal stress from free dislocations and from substructure boundaries in dislocation structure formed in high temperature creep

被引：1

作者：

Orlova, Alena ^{[1
]}

Dobes, Ferdinand ^{[1
]}

机构：

[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic

来源：

MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V | 2008年 / 567-568卷

关键词：

creep; internal stress; subgrain; dislocation density;

D O I：

10.4028/www.scientific.net/MSF.567-568.173

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The relation of the internal stress and the parameters of the heterogeneous dislocation structure was suggested in the form of the classical Taylor formula relating the internal stress to the total dislocation density stored in the subgrain interior and in the subgrain boundaries. The other formula combines linearly the stress contribution generated by network dislocations and the stress contribution of the subgrain structure semiempirically related to the subgrain size. The formulas can evaluate the ratio of internal stress components due to sub-boundaries and free dislocations.

引用

页码：173 / 176

页数：4

共 25 条

[1] INTERNAL STRESS AND DISLOCATION-STRUCTURE OF ALUMINUM IN HIGH-TEMPERATURE CREEP
ORLOVA, A
CADEK, J
TOBOLOVA, Z
PHILOSOPHICAL MAGAZINE, 1972, 26 (06): : 1263 - &
[2] DISLOCATION-STRUCTURE AND APPLIED, EFFECTIVE AND INTERNAL STRESS IN HIGH-TEMPERATURE CREEP OF ALPHA-IRON
ORLOVA, A
PAHUTOVA, M
CADEK, J
PHILOSOPHICAL MAGAZINE, 1972, 25 (04): : 865 - &
[3] RELATION OF DISLOCATION DENSITY TO INTERNAL-STRESS MEASURED IN HIGH-TEMPERATURE CREEP
ORLOVA, A
KOVOVE MATERIALY-METALLIC MATERIALS, 1986, 24 (03): : 305 - 317
[4] INTERNAL AND EFFECTIVE STRESSES IN HIGH-TEMPERATURE CREEP EVALUATED FROM TRANSIENT DIP TESTS AND DISLOCATION BOWING
GROISBOCK, F
JEGLITSCH, F
JOURNAL OF MATERIALS SCIENCE, 1992, 27 (16) : 4365 - 4372
[5] Steady state power law creep resulting from dislocation substructure saturation being approached at higher stress
Chandler, H. D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 771
[6] ON THE RELATION BETWEEN DISLOCATION-STRUCTURE AND INTERNAL-STRESS MEASURED IN PURE METALS AND SINGLE-PHASE ALLOYS IN HIGH-TEMPERATURE CREEP
ORLOVA, A
ACTA METALLURGICA ET MATERIALIA, 1991, 39 (11): : 2805 - 2813
[7] EFFECT OF CARBIDE PRECIPITATION FORMED ON DISLOCATIONS ALONG GRAIN-BOUNDARIES ON HIGH-TEMPERATURE CREEP RESISTANCE OF A NI-30CR ALLOY
KONDO, Y
ISHIZAKI, A
NAMEKATA, J
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (07): : 1187 - 1194
[8] ON THE DIVISION OF HIGH-TEMPERATURE CREEP FROM THE POINT OF VIEW OF DISLOCATION-STRUCTURES
TAKAHASHI, Y
YAMANE, T
SCRIPTA METALLURGICA, 1982, 16 (10): : 1137 - 1139
[9] On the mechanism of dislocation creep of calcite at high temperature: Inferences from experimentally measured pressure sensitivity and strain rate sensitivity of flow stress
De Bresser, JHP
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 2002, 107 (B12)
[10] DETERMINATION OF HARDENING AND RECOVERY IN HIGH-TEMPERATURE CREEP OF NICKEL FROM DISLOCATION DENSITY VARIATION.
Okrainets, P.N.
Pishchak, V.K.
Physics of Metals (English Translation of Metallofizika), 1981, 3 (01): : 141 - 149

← 1 2 3 →