The Grey-Based Taguchi Method: Optimization of Milling of Mold Steel

被引：2
|
作者：
Basmaci, G. [1 ]
Ay, M. [2 ]
Etyemez, A. [3 ]
机构：
[1] Mehmet Akif Ersoy Univ, Fac Engn & Architecture, Merkez Burdur, Turkey
[2] Marmara Univ, Fac Technol, TR-34722 Istanbul, Turkey
[3] Nikket Turkiye, KucukyaliIs Merkezi, A Blok 5, TR-34852 Maltepe Istanbul, Turkey
来源：
ACTA PHYSICA POLONICA A | 2018年 / 134卷 / 01期
关键词：
STAINLESS-STEEL; MACHINING PARAMETERS; SURFACE-ROUGHNESS; TOOL PERFORMANCE; END; MACHINABILITY; WEAR; LIFE;
D O I：
10.12693/APhysPolA.134.24
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
In this study, surface roughness and cutting forces were experimentally investigated in a PMD 23 cold work tool steel milled with multi-layer Al2O3+TiCN coated cutting tools. The effects of progress rate, cutting speed and cutting depth on surface roughness and cutting forces were investigated. The Taguchi technique was used to optimize the milling process. With this study, optimal machinability of PMD 23 cold work tool steel with multi-layer Al2O3+TiCN coated tools was determined by Taguchi Grey based optimization technique. The optimum value is obtained by Taguchi based Grey relational analysis when the machining parameters are as follows: 500 mm/min feed, 3500 rpm spindle speed and 1.0 mm cutting depth (A1B3C2).
引用
收藏
页码：24 / 27
页数：4
相关论文
共 50 条
  • [1] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
    Kuo, Chung-Feng Jeffrey
    Wu, Yi-Shiuan
    International Journal of Advanced Manufacturing Technology, 2006, 27 (5-6): : 525 - 530
  • [2] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
    Chung-Feng Jeffrey Kuo
    Yi-Shiuan Wu
    The International Journal of Advanced Manufacturing Technology, 2006, 27 : 525 - 530
  • [3] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
    Kuo, CFJ
    Wu, YS
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (5-6): : 525 - 530
  • [4] Parametric Optimization of MIG Welding on 316L Austenitic Stainless Steel by Grey-Based Taguchi Method
    Ghosh, Nabendu
    Pal, Pradip Kumar
    Nandi, Goutam
    1ST GLOBAL COLLOQUIUM ON RECENT ADVANCEMENTS AND EFFECTUAL RESEARCHES IN ENGINEERING, SCIENCE AND TECHNOLOGY - RAEREST 2016, 2016, 25 : 1038 - 1048
  • [5] Parametric Optimization of TIG Welding on 316L Austenitic Stainless Steel by Grey-Based Taguchi Method
    Korra, Nanda Naik
    Balasubramanian, K. R.
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 4667 - 4671
  • [6] Multi objective optimization of clinching joints quality using Grey-based Taguchi method
    M. Eshtayeh
    M. Hrairi
    The International Journal of Advanced Manufacturing Technology, 2016, 87 : 233 - 249
  • [7] Multi objective optimization of clinching joints quality using Grey-based Taguchi method
    Eshtayeh, M.
    Hrairi, M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (1-4): : 233 - 249
  • [8] MULTI RESPONSE CHARACTERISTICS OF PROCESS PARAMETERS DURING END MILLING OF GFRP USING GREY-BASED TAGUCHI METHOD
    Sreenivasulu, Reddy
    INDEPENDENT JOURNAL OF MANAGEMENT & PRODUCTION, 2014, 5 (02): : 299 - 313
  • [9] Optimization of weld bead geometry in the activated GMA welding process via a grey-based Taguchi method
    Lin, Hsuan-Liang
    Yan, Jia-Ching
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2014, 28 (08) : 3249 - 3254
  • [10] Optimization of Cutting Parameters, Condition and Geometry in Turning AISI 316L Stainless Steel Using the Grey-Based Taguchi Method
    Basmaci, G.
    Ay, M.
    ACTA PHYSICA POLONICA A, 2017, 131 (03) : 354 - 358
12345