Calculation of load-bearing capacity of prestressed reinforced concrete trusses by the finite element method

被引：4

作者：

Agapov, Vladimir ^{[1
]}

Golovanov, Roman ^{[1
]}

Aidemirov, Kurban ^{[2
]}

机构：

[1] Moscow State Univ Civil Engn, Yaroslavskoye Shosse 26, Moscow, Russia

[2] Daghestan State Tech Univ, 70 I Shamil Ave, Makhachkala 367015, Russia

来源：

ENERGY MANAGEMENT OF MUNICIPAL TRANSPORTATION FACILITIES AND TRANSPORT (EMMFT 2017) | 2017年 / 90卷

关键词：

D O I：

10.1088/1755-1315/90/1/012018

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The technique of calculation of prestressed reinforced concrete trusses with taking into account geometrical and physical nonlinearity is considered. As a tool for solving the problem, the finite element method has been chosen. Basic design equations and methods for their solution are given. It is assumed that there are both a prestressed and nonprestressed reinforcement in the bars of the trusses. The prestress is modeled by setting the temperature effect on the reinforcement. The ways of taking into account the physical and geometrical nonlinearity for bars of reinforced concrete trusses are considered. An example of the analysis of a flat truss is given and the behavior of the truss on various stages of its loading up to destruction is analyzed. A program for the analysis of flat and spatial concrete trusses taking into account the nonlinear deformation is developed. The program is adapted to the computational complex PRINS. As a part of this complex it is available to a wide range of engineering, scientific and technical workers

引用

页数：7

共 50 条

[1] Investigations into the load-bearing capacity of excavations using the finite element method
Juergens, Hauke
GEOTECHNIK, 2025, 48 (01)
[2] Load-bearing capacity of corroded reinforced concrete joists
Vercher, J.
Gil, E.
Mas, A.
STRUCTURES AND ARCHITECTURE: CONCEPTS: APPLICATIONS AND CHALLENGES, 2013, : 873 - 880
[3] Experiments on the residual load-bearing capacity of prestressed confined concrete columns
Janke, Lars
Czaderski, Christoph
Ruth, Juergen
Motavalli, Masoud
ENGINEERING STRUCTURES, 2009, 31 (10) : 2247 - 2256
[4] Calculation of bearing capacity for bending of prestressed steel reinforced concrete girder
Mu, Guang-Bo
Wang, Lian-Guang
Zhou, Le
Dongbei Daxue Xuebao/Journal of Northeastern University, 2008, 29 (11): : 1648 - 1651
[5] Load-bearing capacity of concrete elements reinforced with steel and composite coatings
Pomada, Marta
Czarniawski, Tadeusz
XXII INTERNATIONAL SCIENTIFIC CONFERENCE: CONSTRUCTION THE FORMATION OF LIVING ENVIRONMENT (FORM-2019), 2019, 97
[6] Calculating the Load-Bearing Capacity of Prestressed Wooden Beams
Khitrov E.G.
Birman A.R.
Ugryumov S.A.
Orlov V.V.
Frolov I.S.
Kovaleva O.N.
Polymer Science, Series D, 2023, 16 (4) : 836 - 839
[7] Torsional load-bearing capacity of half-shell segments for prestressed concrete towers
Klein, Fabian
Marx, Steffen
ENGINEERING STRUCTURES, 2021, 243
[8] Effects of irregular holes on load-bearing mechanism and capacity in prestressed concrete cylinder pipes
Zhao, Guofu
Lu, Jun
Su, Kai
Xiao, Junmiao
Li, Jie
Ming, Pan
Sun, Yueyang
Liu, Miaoyan
Wang, Siyao
ENGINEERING FAILURE ANALYSIS, 2025, 167
[9] Increase in the Load-Bearing Capacity of Reinforced Concrete Through Use of Polymer Concrete.
Martin, Joachim
Kunststoffe im Bau, 1985, 20 (02): : 91 - 95
[10] Finite Element Analysis of Load Bearing Capacity of a Reinforced Concrete Frame Subjected to Cyclic Loading
Bamdad, Mahdi
Moghadam, Abdolreza Sarvghad
Mehrani, Mohamad Javad
CIVIL ENGINEERING JOURNAL-TEHRAN, 2016, 2 (05): : 221 - 225

← 1 2 3 4 5 →