Laser surface alloying of molybdenum on aluminum for enhanced wear resistance

被引：37
|
作者：
Rajamure, Ravi Shanker [1 ]
Vora, Hitesh D. [1 ]
Gupta, Niraj [1 ]
Karewar, Shivraj [1 ]
Srinivasan, S. G. [1 ]
Dahotre, Narendra B. [1 ]
机构：
[1] Univ N Texas, Dept Mat Sci & Engn, Lab Laser Aided Addit & Subtract Mfg, Denton, TX 76203 USA
来源：
SURFACE & COATINGS TECHNOLOGY | 2014年 / 258卷
关键词：
Laser surface engineering; Wear resistance; Coatings; Intermetallic; Surface modification; Aluminum; CORROSION-RESISTANCE; MICROSTRUCTURE; OPTIMIZATION; ENERGY;
D O I：
10.1016/j.surfcoat.2014.08.074
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A continuous diode pumped ytterbium laser was used for alloying of molybdenum on Al 1100 to improve its wear resistance. Microstructural and phase analysis was conducted using scanning electron microscopy and X-ray diffraction analysis. Dry wear sliding studies using a pin on disk apparatus at room temperature under a constant normal load of 9 N indicated the increase in wear resistance of laser alloyed coatings. The enhancement in the wear resistance is mainly due to the presence of Al8Mo3 and Al5Mo intermetallic phases within the alloyed surface and their superior physical properties predicted by the first principle calculations. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：337 / 342
页数：6
相关论文
共 50 条
  • [1] Laser Alloying of the Surface Layers of Aluminum Alloys for Improving Their Wear Resistance
    V. D. Aleksandrov
    L. G. Petrova
    M. V. Morshchilov
    A. S. Sergeeva
    Russian Metallurgy (Metally), 2020, 2020 : 1496 - 1501
  • [2] Laser Alloying of the Surface Layers of Aluminum Alloys for Improving Their Wear Resistance
    Aleksandrov, V. D.
    Petrova, L. G.
    Morshchilov, M. V.
    Sergeeva, A. S.
    RUSSIAN METALLURGY, 2020, 2020 (13): : 1496 - 1501
  • [3] Dilution of molybdenum on aluminum during laser surface alloying
    Vora, Hitesh D.
    Rajamure, Ravi Shanker
    Soundarapandian, Santhanakrishnan
    Srinivasan, S. G.
    Dahotre, Narendra B.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 570 : 133 - 143
  • [4] Laser alloying of molybdenum on steel surfaces to increase wear resistance
    Haferkamp, H
    Gerken, J
    Tonshoff, HK
    Marquering, M
    SURFACE MODIFICATION TECHNOLOGIES IX, 1996, : 547 - 564
  • [5] Wear enhancement of aluminum by laser surface alloying with silicon
    McCay, MH
    Kennedy, N
    Hopkins, JA
    Dahotre, NB
    LASERS IN ENGINEERING, 2000, 10 (02) : 107 - 122
  • [6] Surface treatments for enhanced wear resistance of aluminum
    Bokmark, Gunilla
    Holmbom, Goran
    Persson, Per-Olof
    Siden, Jan
    Granlund, Lennart
    Transactions of the Institute of Metal Finishing, 1997, 75 (03): : 122 - 130
  • [7] LASER-SURFACE ALLOYING OF NICKEL BY MOLYBDENUM AND ALUMINUM MICROSTRUCTURAL STUDIES
    DEY, GK
    KULKARNI, UD
    BATRA, IS
    BANERJEE, S
    ACTA METALLURGICA ET MATERIALIA, 1994, 42 (09): : 2973 - 2981
  • [8] Laser Surface Alloying of Aluminum for Improving Acid Corrosion Resistance
    Jiru W.G.
    Sankar M.R.
    Dixit U.S.
    Journal of The Institution of Engineers (India): Series C, 2019, 100 (03) : 481 - 492
  • [9] Surface engineered AlMn alloy using laser surface alloying for wear resistance
    Moera Gutu Jiru
    Balkeshwar Singh
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 275 - 281
  • [10] Surface engineered AlMn alloy using laser surface alloying for wear resistance
    Jiru, Moera Gutu
    Singh, Balkeshwar
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (1-2): : 275 - 281
12345