Effect of Ce on solidification and mechanical properties of A360 alloy

被引：64

作者：

Voncina, Maja ^{[1
]}

Kores, Stanislav ^{[1
]}

Mrvar, Primoz ^{[1
]}

Medved, Jozef ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Nat Sci & Engn, Dept Met & Mat, Ljubljana 1000, Slovenia

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2011年 / 509卷 / 27期

关键词：

Ce modification in A360 alloy; Reaction kinetics; Mechanical properties; Differential scanning calorimetry; MICROSTRUCTURE;

D O I：

10.1016/j.jallcom.2011.04.059

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The effect of Ce addition on the AA A360 (Al-10%Si-0.5%Mg) alloy was investigated using equilibrium thermodynamic calculation, thermal analysis, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The purpose is to study the variations that occur during solidification and precipitation with different Ce additions, as well as their effect on the mechanical properties. The results show that the Ce addition decreases the eutectic (alpha(Al) + Mg2Si) temperature. The solidus temperature also decreases with the increasing Ce addition. The precipitation enthalpy determined using DSC decreases with the Ce addition, while precipitation takes place more rapidly and intensively, indicating increased reaction kinetics. The mechanical properties like hardness and tensile strength also increase with the Ce addition. The phase that contributed to the hardness of the investigated alloy was composed of Al, Ce, Mg and Si. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：7349 / 7355

页数：7

共 50 条

[1] Effects of Sc-Er Rare Earth on Solidification Microstructure and Mechanical Properties of A360 Alloy
Yuan, Shuaijie
Peng, Jianfei
Wang, Wanlin
Zhan, Yan
Zeng, Jie
Gan, Peiyuan
Ji, Junyu
INTERNATIONAL JOURNAL OF METALCASTING, 2024,
[2] An investigation of temperature effect on microstructure and mechanical properties of aluminum (A360) processed by thixoforging
Besharati, M. K.
Davami, K.
Shaygan, M.
ROBOTICS, CONTROL AND MANUFACTURING TECHNOLOGY, 2008, : 86 - 92
[3] Semisolid structure and parameters for A360 aluminum alloy prepared by mechanical stirring
Kaykha, M.M.
Kamarei, A.
Safari, M.
Arbabi, V.
World Academy of Science, Engineering and Technology, 2011, 73 : 872 - 874
[4] An investigation on semi-solid forming of A360 aluminium alloy by mechanical stirring
Safari, M.
Keikha, M. M.
Kamarei, A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2012, 226 (E3) : 205 - 215
[5] Effect of Sr-Ti-B and T6 Heat Treatment on Microstructure and Mechanical Properties of Sand Cast A360 Alloy
Karakoca, Alper
Yilmaz, Serdar Osman
INTERNATIONAL JOURNAL OF METALCASTING, 2024,
[6] Characterization of properties of Vanadium, Boron and Strontium addition on HPDC of A360 alloy
Gursoy, Ozen
Colak, Murat
Tur, Kazim
Dispinar, Derya
MATERIALS CHEMISTRY AND PHYSICS, 2021, 271
[7] Effect of Ce and solidification cooling rate on the microstructure and mechanical properties of AA2017 aluminum alloy
Rojas-Arias, N.
Silva, Argos Soares
Sousa, Sarah Maria de Albuquerque
Gouveia, Guilherme Lisboa de
Amancio-Filho, S. T.
Coury, F. G.
Spinelli, Jose Eduardo
Gargarella, P.
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 998
[8] Influence of Melt Quality on the Formation of Fe Intermetallic in A360 Alloy
Bas, E. N.
Alper, S.
Tuncay, T.
Dispinar, D.
Kirtay, S.
ARCHIVES OF FOUNDRY ENGINEERING, 2022, 22 (03) : 53 - 59
[9] Studies on mechanical behaviour of AlSi10Mg alloy produced by Selective Laser Melting and A360 alloy by die casting
Bharath, Channappa
Shamanth, V
Hemanth, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 78 - 81
[10] Influence of rapid solidification on the mechanical properties of Mg-Zn-Ce-Ag magnesium alloy
Cai, J.
Ma, G. C.
Liu, Z.
Zhang, H. F.
Wang, A. M.
Hu, Z. Q.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 364 - 367

← 1 2 3 4 5 →