Analysis of Lightweight Polystyrene Foam Concrete Flat Slabs under Fire Condition

被引：1
|
作者：
Alzara, Majed [1 ]
Riad, Magdy [2 ]
AbdelMongy, Mohamed [1 ,3 ]
Farouk, Mohamed A. [4 ]
Yosri, Ahmed M. [1 ,4 ]
Moubarak, Ahmed M. [4 ]
Ehab, Ahmed [5 ]
机构：
[1] Jouf Univ, Dept Civil Engn, Sakakah, Saudi Arabia
[2] El Shourouk Acad, Higher Inst Engn, Civil Engn Dept, El Shorouk, Egypt
[3] Al Azhar Univ, Fac Engn, Civil Engn Dept, Cairo, Egypt
[4] Delta Univ Sci & Technol, Fac Engn, Civil Engn Dept, Belkas, Egypt
[5] Badr Univ Cairo, Dept Civil Engn, Badr, Egypt
来源：
ADVANCES IN CIVIL ENGINEERING | 2022年 / 2022卷
关键词：
BEHAVIOR;
D O I：
10.1155/2022/1964903
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Lightweight reinforced concrete (LWC) is widely used in various reinforced concrete (RC) applications, such as its use in diverse types of reinforced concrete slabs. The aim of this study is to analyze the behavior of reinforced foam concrete slabs (flat slab type) that are exposed to fire conditions under the influence of eccentric loads as well as concentric loads. This analysis has been done using the finite element method by a (ANSYS) software program. The validity of the adopted models was verified through comparison with a previous experimental study. The studied specimens were eleven reinforced concrete flat slabs with a thickness of 150 mm. The lightweight polystyrene foam concrete was used in these specimens with a density of 1820 kg/m(3). The results showed that the fire effect lead to a decrease in the maximum carrying load of foam concrete slabs by 25%. Also, by comparing the finite element results with the selected experimental study, the results showed a great agreement with the analytical study used in this research.
引用
收藏
页数：11
相关论文
共 50 条
  • [1] Analysis of Lightweight Polystyrene Foam Concrete Flat Slabs under Fire Condition
    Alzara, Majed
    Riad, Magdy
    AbdelMongy, Mohamed
    Farouk, Mohamed A.
    Yosri, Ahmed M.
    Moubarak, Ahmed M.
    Ehab, Ahmed
    ADVANCES IN CIVIL ENGINEERING, 2022, 2022
  • [2] Designing reinforced concrete slabs under fire condition
    Maciag, Michal
    Spodzieja, Szymon
    XXVII R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (27RSP) (TFOCE 2018), 2018, 196
  • [3] Punching shear capacity of expanded polystyrene (EPS) lightweight concrete flat slabs without shear reinforcement
    Ahmed, Faris Rashied
    ADVANCES IN MECHANICAL ENGINEERING, 2023, 15 (09)
  • [4] Comparative study of LightWeight and Normal Concrete composite slabs behaviour under fire conditions
    Jose del Coz-Diaz, Juan
    Enrique Martinez-Martinez, Juan
    Alonso-Martinez, Mar
    Alvarez Rabanal, Felipe Pedro
    ENGINEERING STRUCTURES, 2020, 207
  • [5] MODELING OF CONCRETE SLABS UNDER FIRE
    AHMED, GN
    HUANG, CLD
    CHEMICAL ENGINEERING COMMUNICATIONS, 1990, 91 : 241 - 253
  • [6] Numerical analysis of simply supported one-way reinforced concrete slabs under fire condition
    Ding, Fa-xing
    Wang, Wenjun
    Jiang, Binhui
    Wang, Liping
    Liu, Xuemei
    COMPUTERS AND CONCRETE, 2021, 27 (04): : 355 - 367
  • [7] Punching shear tests on flat concrete slabs exposed to fire
    Annerel, E.
    Lu, L.
    Taerwe, L.
    FIRE SAFETY JOURNAL, 2013, 57 : 83 - 95
  • [8] Wide spans due to flat slabs with structural lightweight aggregate concrete
    Stracke, Julia
    Held, Markus
    Beton- und Stahlbetonbau, 2006, 101 (05) : 308 - 310
  • [9] Experimental investigations on punching shear of lightweight aggregate concrete flat slabs
    Urban, Tadeusz
    Goldyn, Michal
    Krawczyk, Lukasz
    Sowa, Lukasz
    ENGINEERING STRUCTURES, 2019, 197
  • [10] Analysis and deflections of reinforced concrete flat slabs
    Sherif, AG
    Dilger, WH
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1998, 25 (03) : 451 - 466
12345