Measurement of Formula One car drag forces on the test track

被引:0
|
作者
Crewe, CM
Passmore, MA
Symonds, P
机构
关键词
D O I
暂无
中图分类号
U [交通运输];
学科分类号
08 ; 0823 ;
摘要
Coastdown testing is a proven method for determining the drag coefficients for road cars whilst the vehicle is in its normal operating environment. An accurate method of achieving this has been successfully developed at Loughborough University. This paper describes the adaptation and application of these techniques to the special case of a contemporary Formula One racing car. The work was undertaken in conjunction with the Benetton Formula One racing team. The paper outlines the development and application of a suitable mathematical model for this particular type of vehicle. The model includes the aerodynamic, tyre, drivetrain and the un-driven wheel drags and accounts for the change in aerodynamic drag due to ambient wind and changes in vehicle ride height during the coastdown. The test and analysis methods are described. The results from a series of coastdown tests conducted at a current Grand Prix circuit are presented and compared to the results from tyre rig and wind tunnel measurements.
引用
收藏
页码:99 / 105
页数:3
相关论文
共 50 条
  • [1] Metrology and Formula One Car
    Cocco, L.
    Daponte, P.
    2008 IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1-5, 2008, : 755 - +
  • [2] Optimal Control of a Formula One Car on a Three-Dimensional Track-Part 1: Track Modeling and Identification
    Perantoni, Giacomo
    Limebeer, David J. N.
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2015, 137 (05):
  • [3] AIRFLOW MEASUREMENT AT FORMULA STUDENT CAR
    Sebela, K.
    Janousek, M.
    ENGINEERING MECHANICS 2020 (IM2020), 2020, : 452 - 455
  • [4] AERODYNAMIC FORCES ON A SIMPLIFIED CAR BODY - TOWARDS INNOVATIVE DESIGNS FOR CAR DRAG REDUCTION
    Khaled, Mahmoud
    Harambat, Fabien
    Yammine, Anthony
    Peerhossaini, Hassan
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE - 2010 - VOL 1, PTS A-C, 2010, : 2595 - 2604
  • [5] Measurement and computation of drag forces in thermogravimetric studies
    Dipak Mazumdar
    Ahindra Ghosh
    Kamlesh K. Singh
    Metallurgical and Materials Transactions B, 2002, 33 : 891 - 896
  • [6] Measurement and computation of drag forces in thermogravimetric studies
    Mazumdar, D
    Singh, KK
    Ghosh, A
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2002, 33 (06): : 891 - 896
  • [7] Optimal tyre usage for a Formula One car
    Tremlett, A. J.
    Limebeer, D. J. N.
    VEHICLE SYSTEM DYNAMICS, 2016, 54 (10) : 1448 - 1473
  • [8] Optimal Control of a Formula One Car on a Three-Dimensional Track-Part 2: Optimal Control
    Limebeer, D. J. N.
    Perantoni, G.
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2015, 137 (05):
  • [9] Optimal Tyre Management of a Formula One car
    West, Wilhelm J.
    Limebeer, David J. N.
    IFAC PAPERSONLINE, 2020, 53 (02): : 14456 - 14461
  • [10] Titanium in Formula One racing car construction
    Smith, AJ
    COST-EFFECTIVE TITANIUM COMPONENT TECHNOLOGY FOR LEADING-EDGE PERFORMANCE, 2000, 2000 (19): : 111 - 119