Pretreatment processing of gelcast green body before debinding

被引：3
|
作者：
Dai, CL [1 ]
Yang, JL [1 ]
Huang, Y [1 ]
机构：
[1] Tsinghua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
来源：
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 | 2005年 / 475-479卷
关键词：
gelcasting; pretreatment processing; degradation; debinding;
D O I：
10.4028/www.scientific.net/MSF.475-479.1321
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Gelcasting is a novel ceramic forming technology that could be used to manufacture high-performance ceramics with complex shape. However, there are some problems in debinding of large-size green body made by gelcasting. In this paper, a new pretreatment way before binder burn-out was introduced. By means of this pretreatment processing, large-size green bodies with no defects were successfully obtained.
引用
收藏
页码：1321 / 1324
页数：4
相关论文
共 50 条
  • [1] DAEM kinetics analysis and finite element simulation of thermal debinding process for a gelcast SiAlON green body
    Li, Jing
    Zhang, Chuanfu
    Yin, Ruiming
    Zhang, Wenhai
    CERAMICS INTERNATIONAL, 2019, 45 (07) : 8166 - 8174
  • [2] EFFECT OF THE POLYMER STRUCTURE IN A GELCAST GREEN BODY ON GRAPHITIZATION
    Kato, Tomoaki
    Shirai, Takashi
    Watanabe, Hideo
    Fuji, Masayoshi
    Takahashi, Minoru
    CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III, 2010, 219 : 319 - 324
  • [3] Consolidation and green body characteristics of gelcast metallic powder
    Santos, R. F.
    Cardoso, K. R.
    Albers, A. P. F.
    Ortega, F. S.
    POWDER METALLURGY, 2007, 50 (01) : 91 - 93
  • [4] Effect of green body size and heating rate on failure during thermal debinding and on the debinding cycle time
    Sachanandani, Rajiv M.
    Lombardo, Stephen J.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2011, 12 (02): : 115 - 121
  • [5] Debinding of Gelcasting Al2O3 Green Body
    Zhang Liming
    Zhang Li
    Wang Longguang
    Zhou Huijun
    Liu Peng
    Li Zhihang
    Huang Yong
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 : 697 - 701
  • [6] Machining behaviour of green gelcast ceramics
    Kamboj, RK
    Dhara, S
    Bhargava, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (07) : 1005 - 1011
  • [7] Suppression of water-soluble polymer on surface-exfoliation of gelcast green body of alumina
    Ma, JT
    Xie, ZP
    Miao, HZ
    Huang, Y
    Cheng, YB
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 : 121 - 124
  • [8] Preparation of ceramics concentrated suspension of 95 alumina and the polymerization on the surface of gelcast green body retarded by oxygen
    Ning, Wu-Cheng
    Liu, Wei-Liang
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2009, 38 (05): : 1241 - 1245
  • [9] Gelcast tooling: Net shape casting and green machining
    Oak Ridge Natl Lab, Oak Ridge, United States
    Mater Manuf Process, 3 (389-403):
  • [10] Gelcast tooling: Net shape casting and green machining
    Janney, MA
    Ren, WJ
    Kirby, GH
    Nunn, SD
    Viswanathan, S
    MATERIALS AND MANUFACTURING PROCESSES, 1998, 13 (03) : 389 - 403
12345