Microstructure and mechanical properties of ZrB2-SiC-ZrO2f ceramic

被引：45
|
作者：
Lin Jia [1 ]
Zhang Xinghong [1 ]
Wang Zhi [2 ]
Han Wenbo [1 ]
机构：
[1] Harbin Inst Technol, Natl Key Lab Sci & Technol Adv Composites Special, Harbin 150001, Peoples R China
[2] Dalian Univ Technol, Sch Aeronaut & Astronaut, Fac Vehicle Engn & Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China
来源：
SCRIPTA MATERIALIA | 2011年 / 64卷 / 09期
基金：
中国博士后科学基金;
关键词：
Ceramics; Microstructure; Mechanical properties; Composites; TEMPERATURE CERAMICS; COMPOSITES; ZIRCONIUM; FIBER;
D O I：
10.1016/j.scriptamat.2011.01.019
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
ZrB2-SiC-ZrO2f ceramic was fabricated by hot-pressing at 1850 degrees C for 1 h under a uniaxial load of 30 MPa in vacuum. The ZrB2-SiC-ZrO2f ceramic thus produced showed excellent fracture toughness due to the addition of ZrO2 fiber. The increase in toughness was attributed mainly to the addition of the ZrO2 fiber, which could enhance fiber pull-out, crack bridging and crack branching. In addition, the stress-induced transformation toughening was also considered to be main reason for the improvement in toughness. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：872 / 875
页数：4
相关论文
共 50 条
  • [1] Influence of milling time on the synthesis, microstructure and mechanical properties of ZrB2-SiC-ZrO2f ceramic composites
    Lin, Jia
    Zhang, Xinghong
    Han, Wenbo
    Sun, Di
    CERAMICS INTERNATIONAL, 2013, 39 (04) : 4213 - 4219
  • [2] Effects of sintering velocity on the microstructure and mechanical properties of hot-pressed ZrB2-SiC-ZrO2f ceramics
    Lin, Jia
    Zhang, Xinghong
    Dong, Shun
    Yang, Yang
    Han, Wenbo
    Jin, Hua
    MATERIALS & DESIGN, 2013, 49 : 681 - 686
  • [3] Microstructure and mechanical properties of hot-pressed ZrB2-SiC-ZrO2f ceramics with different sintering temperatures
    Lin Jia
    Zhang Xinghong
    Wang Zhi
    Han Wenbo
    Jin Hua
    MATERIALS & DESIGN, 2012, 34 : 853 - 856
  • [4] Microstructure and mechanical properties of ZrB2-SiC nanocomposite ceramic
    Liu, Qiang
    Han, Wenbo
    Hu, Ping
    SCRIPTA MATERIALIA, 2009, 61 (07) : 690 - 692
  • [5] Microstructure and mechanical properties of ZrB2-SiC ceramic composite brazed joint
    Xu, Xiaolong
    Li, Zhuoran
    Liu, Ruihua
    Wang, Zhengzheng
    Hanjie Xuebao/Transactions of the China Welding Institution, 2014, 35 (01): : 59 - 62
  • [6] Microstructure and mechanical properties of laminated ZrB2-SiC ceramics with ZrO2 interface layers
    Wei, Chuncheng
    Zhang, Xinghong
    Hu, Ping
    Han, Wenbo
    Li, Shuang
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 30 (01): : 173 - 176
  • [7] Microstructure and mechanical properties of ZrB2-SiC composites
    Liu, Qiang
    Han, Wenbo
    Zhang, Xinghong
    Wang, Shuo
    Han, Jiecai
    MATERIALS LETTERS, 2009, 63 (15) : 1323 - 1325
  • [8] Preparation, microstructure and mechanical properties of ZrB2-ZrO2 ceramics
    Li, Weijie
    Zhang, Xinghong
    Hong, Changqing
    Han, Wenbo
    Han, Jiecai
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (04) : 779 - 786
  • [9] Microstructure and Mechanical Properties of C/(ZrB2–SiC) Composites Produced from Ceramic Ribbons
    A. V. Utkin
    V. E. Prokip
    D. A. Bannykh
    M. A. Golosov
    N. I. Baklanova
    Inorganic Materials, 2022, 58 : 183 - 189
  • [10] Microstructure and Mechanical Properties of C/(ZrB2-SiC) Composites Produced from Ceramic Ribbons
    Utkin, A., V
    Prokip, V. E.
    Bannykh, D. A.
    Golosov, M. A.
    Baklanova, N., I
    INORGANIC MATERIALS, 2022, 58 (02) : 183 - 189
12345