A study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys - Discussion

被引：0
|
作者：
Raghavan, V [1 ]
Datta, R [1 ]
机构：
[1] INDIA LTD R&D,STEEL AUTHOR,RANCHI 834002,BIHAR,INDIA
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1997年 / 28卷 / 03期
关键词：
Martensite; Material Transaction; Lath Martensite; Transformation Start; Isothermal Mode;
D O I：
10.1007/s11661-997-0058-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
P. Visvesvaran extended the study on the morphology and plate dimensions in Fe-Ni and Fe-Ni-Mn alloys to Fe-Ni-Cr alloys and confirmed previous experimental results on Fe-Ni alloys in his paper on `A Study on Morphology and Plate Mean Dimensions in Fe-Ni and Fe-Ni-Cr Alloys.' However, there are some serious inconsistencies in the interpretation of the results which warrant a discussion. As an example, thin-plate morphology is known to occur at very low temperatures with a fully-twinned structure and with smooth and straight boundaries, in some cases, exhibiting thermoelastic behavior. Visvesvaran overlooked the drastic change in the kinetic mode on adding Cr to Fe-Ni alloy, and that the isothermal behavior becomes dominant.
引用
收藏
页码：721 / 722
页数：2
相关论文
共 50 条
  • [1] Discussion of “a study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys”
    V. Raghavan
    R. Datta
    Metallurgical and Materials Transactions A, 1997, 28 : 721 - 721
  • [2] A study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys
    Visvesvaran, P
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (04): : 973 - 980
  • [3] Study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys
    Indian Inst of Technology, New Delhi, India
    Metall Mat Trans A Phys Metall Mat Sci, 4 (973-980):
  • [4] Investigation of the Absorption Properties of the Alloys Fe-Ni and Fe-Ni-Cr Prepared by Mechanical Alloying
    Gu Shuchao
    Duan Yuping
    Duan Peng
    Wang Song
    Qiu Guoping
    Liu Yuzhe
    JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (07) : 2331 - 2339
  • [5] Investigation of the Absorption Properties of the Alloys Fe-Ni and Fe-Ni-Cr Prepared by Mechanical Alloying
    Gu Shuchao
    Duan Yuping
    Duan Peng
    Wang Song
    Qiu Guoping
    Liu Yuzhe
    Journal of Electronic Materials, 2015, 44 : 2331 - 2339
  • [6] A COMPARISON OF PLASTIC-FLOW IN FE-NI INVAR AND FE-NI-CR ELINVAR ALLOYS
    GRUJICIC, M
    OWEN, WS
    JOURNAL OF METALS, 1988, 40 (11): : 115 - 115
  • [7] Theoretical analysis of anomalies in high-temperature oxidation of Fe-Cr, Fe-ni, and Fe-Ni-Cr alloys
    Khokhlov, V.V.
    Rakoch, A.G.
    Dement'eva, E.S.
    Lyzlov, O.A.
    Zashchita Metallov, 2004, 40 (01): : 68 - 73
  • [8] Theoretical analysis of anomalies in high-temperature oxidation of Fe-Cr, Fe-Ni, and Fe-Ni-Cr alloys
    Khokhlov, VV
    Rakoch, AG
    Dement'eva, ES
    Lyzov, OA
    PROTECTION OF METALS, 2004, 40 (01): : 62 - 66
  • [9] MOSSBAUER STUDY OF ELECTROCHEMICALLY DEPOSITED FE-NI-CR AND FE-NI-CR-P ALLOYS
    KUZMANN, E
    VERTES, A
    CHISHOLM, CU
    WATSON, A
    ELSHARIF, MR
    ANDERSON, AMH
    HYPERFINE INTERACTIONS, 1990, 54 (1-4): : 821 - 824
  • [10] MORPHOLOGY OF MARTENSITE IN FE-NI ALLOYS
    DATTA, R
    RAGHAVAN, V
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1984, 37 (01): : 83 - 88
12345