Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy

被引:90
|
作者
Chang, C. S. T. [1 ]
Banhart, J. [2 ]
机构
[1] Helmholtz Ctr Berlin Mat & Energy, Inst Appl Mat, D-14109 Berlin, Germany
[2] Tech Univ Berlin, Inst Mat Sci & Technol, D-10623 Berlin, Germany
关键词
AGING BEHAVIOR; PRECIPITATION; ALUMINUM; STABILITY; CLUSTERS; CU;
D O I
10.1007/s11661-010-0596-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The clustering behavior at room temperature of a pure ternary Al-0.59 wt pct Mg-0.82 wt pct Si alloy was investigated by low-temperature differential scanning calorimetry (DSC). We find three clustering reactions that take place in two stages. The first two reactions are linked to each other and are completed after 1 hour. The third reaction starts around 1 hour after quenching and is completed after 2 weeks. Only the latter reaction exhibits a strong shift of the peak position of the thermal signal, indicating a change in the activation energy during aging at room temperature caused by changing solute supersaturation or increasing trapping of vacancies. The first two stages are closely linked to the known adverse effect of room-temperature preaging on the ensuing age-hardening step, since 60 to 80 pct of cluster formation is sufficient to establish the full negative effect.
引用
收藏
页码:1960 / 1964
页数:5
相关论文
共 50 条
  • [1] Low-Temperature Differential Scanning Calorimetry of an Al-Mg-Si Alloy
    C. S. T. Chang
    J. Banhart
    Metallurgical and Materials Transactions A, 2011, 42 : 1960 - 1964
  • [2] Influence of starting temperature on differential scanning calorimetry measurements of an Al-Mg-Si alloy
    Pogatscher, S.
    Antrekowitsch, H.
    Uggowitzer, P. J.
    MATERIALS LETTERS, 2013, 100 : 163 - 165
  • [3] Modelling of differential scanning calorimetry heating curves for precipitation and dissolution in an Al-Mg-Si
    Afshar, Mehran
    Mao, Fengxin
    Jiang, Haichun
    Mohles, Volker
    Schick, Michael
    Hack, Klaus
    Korte-Kerzel, Sandra
    Barrales-Mora, Luis A.
    COMPUTATIONAL MATERIALS SCIENCE, 2019, 158 : 235 - 242
  • [4] Transmission electron microscopy and differential scanning calorimetry studies on the precipitation sequence in an Al-Mg-Si alloy: AA6022
    Reza S. Yassar
    David P. Field
    Hasso Weiland
    Journal of Materials Research, 2005, 20 : 2705 - 2711
  • [5] Transmission electron microscopy and differential scanning calorimetry studies on the precipitation sequence in an Al-Mg-Si alloy: AA6022
    Yassar, RS
    Field, DP
    Weiland, H
    JOURNAL OF MATERIALS RESEARCH, 2005, 20 (10) : 2705 - 2711
  • [6] Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys
    Jiang, XJ
    Noble, B
    Holme, B
    Waterloo, G
    Tafto, J
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (02): : 339 - 348
  • [7] Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys
    X. J. Jiang
    J. Tafto
    B. Noble
    B. Holme
    G. Waterloo
    Metallurgical and Materials Transactions A, 2000, 31 : 339 - 348
  • [8] LOW-TEMPERATURE MICRO-CALORIMETRY BY DIFFERENTIAL SCANNING
    RAHM, U
    GMELIN, E
    JOURNAL OF THERMAL ANALYSIS, 1992, 38 (03): : 335 - 344
  • [9] Deformation behavior of Al-Mg-Si alloy at the elevated temperature
    Kwon, Y.-N.
    Lee, Y. S.
    Lee, J. H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 533 - 536
  • [10] Effect of low temperature stabilisation on the precipitation of a continuously cast Al-Mg-Si alloy
    Slamova, Margarita
    Janecek, Milos
    Cieslar, Miroslav
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 462 (1-2): : 375 - 379