Steel truss/composite skin hybrid ship hull. Part I: Design and analysis

被引：15
|
作者：
Cao, Jun [1 ]
Grenestedt, Joachim L. [1 ]
Maroun, William J. [1 ]
机构：
[1] Lehigh Univ, Dept Mech Engn & Mech, Bethlehem, PA 18015 USA
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2007年 / 38卷 / 07期
关键词：
hybrid ship hulls; polymer-matrix composites; mechanical properties; finite element analysis;
D O I：
10.1016/j.compositesa.2006.11.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A hybrid ship hull made of a steel truss and composite sandwich skins was investigated. The steel truss was designed to carry the bending loads, whereas the composite skins were designed to carry shear and water pressure loads. A 142 m ship hull, similar to a destroyer in terms of size, weight and speed, was designed, finite element analyzed and optimized. Loads were essentially based on the regulations of the American Bureau of Shipping (ABS). A small scale model will be developed and tested in the next stage to verify the design. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1755 / 1762
页数：8
相关论文
共 50 条
  • [1] Steel truss/composite skin hybrid ship hull. Part II: Manufacturing and sagging testing
    Maroun, William J.
    Cao, Jun
    Grenestedt, Joachim L.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (07) : 1763 - 1772
  • [2] Testing and analysis of a 6-m steel truss/composite skin hybrid ship hull model
    Cao, Jun
    Grenestedt, Joachim L.
    Maroun, William J.
    MARINE STRUCTURES, 2006, 19 (01) : 23 - 32
  • [3] Analysis of a hybrid composite/metal ship hull structural system with removable panels
    Kabche, Jean Paul
    Caccese, Vincent
    Berube, Keith A.
    Thompson, Lawrence
    Ships and Offshore Structures, 2007, 2 (03) : 227 - 240
  • [4] Reliability analysis of a ship hull in composite material
    Chen, NZ
    Sun, HH
    Soares, CG
    COMPOSITE STRUCTURES, 2003, 62 (01) : 59 - 66
  • [5] Design and testing of joints for composite sandwich/steel hybrid ship hulls
    Cao, J
    Grenestedt, JL
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2004, 35 (09) : 1091 - 1105
  • [6] SHIP HULL HYBRID STRUCTURAL DESIGN ACCOUNTING FOR RELIABILITY
    Koni, E.
    Garbatov, Y.
    INTERNATIONAL JOURNAL OF MARITIME ENGINEERING, 2024, 166
  • [7] Alternative hybrid lightweight ship hull structural design
    Garbatov, Y.
    Marchese, S. Scattareggia
    Palomba, G.
    Crupi, V.
    TRENDS IN MARITIME TECHNOLOGY AND ENGINEERING, MARTECH 2022, VOL 1, 2022, 8 : 99 - 107
  • [8] Numerical analysis of influence of ship hull form modification on ship resistance and propulsion characteristics Part I Influence of hull form modification on ship resistance characteristics
    Szelangiewicz, Tadeusz
    Abramowski, Tomasz
    POLISH MARITIME RESEARCH, 2009, 16 (04) : 3 - 8
  • [9] Analysis of prestressed composite truss girders with steel truss webs
    Xie, X. (xiexu@zju.edu.cn), 1600, Zhejiang University (48):
  • [10] Investigation on the Structural Damage of a Double-Hull Ship, Part I - Ship Collision
    Prabowo, Aditya Rio
    Baek, Seung Jun
    Byeon, Jung Hoon
    Bae, Dong Myung
    Cho, Joung Hyung
    Sohn, Jung Min
    2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY, ICSI 2017, 2017, 5 : 935 - 942
12345