Gearbox monitoring using induction machine stator current analysis

被引：0

作者：

Kia, Shahin Hedayati ^{[1
]}

Henao, Humberto ^{[1
]}

Capolino, Gerard-Andre ^{[1
]}

机构：

[1] Univ Picardie Jules Verne, Dept Elect Engn, F-80039 Amiens 1, France

来源：

2007 IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS & DRIVES | 2007年

关键词：

current measurement; mechanical systems; monitoring; vibration measurement;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The aim of this paper is the monitoring of a gearbox by using the stator current signature analysis in the driving induction machines. The detection of mechanical faults using the vibration signal analysis has been well studied before. Recently, some works have been performed in order to observe the vibration components of the mechanical part in the stator current spectrum for an induction machine but without any theoretical detail. This paper proposes a theoretical framework based on torque oscillations due to the characteristic torsional vibrations in a gearbox and the source of mesh and rotating frequency components in the stator current is presented. In order to verify the theoretical development, a test-bed based on a 5.5kW three-phase squirrel-cage machine connected to a gearbox has been used.

引用

页码：157 / 162

页数：6

共 50 条

[1] A Modeling Approach for Gearbox Monitoring Using Stator Current Signature in Induction Machines
Kia, Shahin Hedayati
Henao, Humberto
Capolino, Gerard-Andre
2008 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, VOLS 1-5, 2008, : 2323 - 2328
[2] Analytical and Experimental Study of Gearbox Mechanical Effect on the Induction Machine Stator Current Signature
Kia, Shahin Hedayati
Henao, Humberto
Capolino, Gerard-Andre
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2009, 45 (04) : 1405 - 1415
[3] Bearing fault detection in induction machine based on stator current spectrum monitoring
Kanemaru M.
Tsukima M.
Miyauchi T.
Hayashi K.
IEEJ Transactions on Industry Applications, 2017, 137 (10) : 799 - 805
[4] Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring
Kanemaru, Makoto
Tsukima, Mitsuru
Miyauchi, Toshihiko
Hayashi, Kazufumi
IEEJ JOURNAL OF INDUSTRY APPLICATIONS, 2018, 7 (03) : 282 - 288
[5] Fault Diagnosis of Wind Turbine Gearbox Using DFIG Stator Current Analysis
Cheng, Fangzhou
Wei, Chun
Qu, Liyan
Qiao, Wei
2016 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2016,
[6] Gearbox Monitoring by Using the Stray Flux in an Induction Machine Based Electromechanical System
Fatemi, S. M. J. Rastegar
Henao, H.
Capolino, G. A.
2008 IEEE MEDITERRANEAN ELECTROTECHNICAL CONFERENCE, VOLS 1 AND 2, 2008, : 463 - +
[7] On the Monitoring of Rotor Fault in Induction Machine by the Use of the TSA Method Applied to Stator Current
Ngote, N.
Guedira, S.
Ouassaid, M.
Cherkaoui, M.
Maaroufi, M.
INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE, 2012, 7 (04): : 4822 - 4828
[8] Induction Machine Fault Diagnosis Using Stator Current Subspace Spectral Estimation
Kumar, R. R.
Cirrincione, G.
Cirrincione, M.
Tortella, A.
Andriollo, M.
2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2018, : 2565 - 2570
[9] Induction machine faults detection using stator current parametric spectral estimation
El Bouchikhi, El Houssin
Choqueuse, Vincent
Benbouzid, Mohamed
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2015, 52-53 : 447 - 464
[10] Robust adaptive stator current control for an induction machine
Zhang, CJ
Dunnigan, MW
CCA 2003: PROCEEDINGS OF 2003 IEEE CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 AND 2, 2003, : 779 - 784

← 1 2 3 4 5 →