Fabrication of wire saw with patterned hard bumps by electrical discharge machining with powder suspended in working oil

被引：4

作者：

Furutani, Katsushi ^{[1
]}

Murase, Yasuo ^{[1
]}

机构：

[1] Toyota Technol Inst, Dept Adv Sci & Technol, Fac Engn, Nagoya, Aichi 468, Japan

来源：

MANUFACTURING SYSTEMS AND TECHNOLOGIES FOR THE NEW FRONTIER | 2008年

关键词：

slicing; deposition; titanium carbide;

D O I：

10.1007/978-1-84800-267-8_73

中图分类号：

F [经济];

学科分类号：

02 ;

摘要：

This paper deals with a fabrication method of a wire saw by electrical discharge machining (EDM). Hard bumps were discretely patterned on the surface of a thin stainless steel wire by EDM with titanium powder suspended in working oil. With an increase of the machining time, the average of the bump height was increased and no removal was observed. The bumps were deposited from four directions in an orthogonal sequence by manually turning the wire. A soda lime glass rod could be cut with the wire saw. The bumps tightly adhered on the wire.

引用

页码：361 / 364

页数：4

共 50 条

[1] Experimental investigations of deposition conditions for saw wire fabrication by electrical discharge machining
Furutani, Katsushi
Suzuki, Koji
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (9-12): : 1643 - 1651
[2] Experimental investigations of deposition conditions for saw wire fabrication by electrical discharge machining
Katsushi Furutani
Koji Suzuki
The International Journal of Advanced Manufacturing Technology, 2015, 76 : 1643 - 1651
[3] Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process
Katsushi Furutani
Hiromichi Sato
Masayuki Suzuki
The International Journal of Advanced Manufacturing Technology, 2009, 40 : 1093 - 1101
[4] Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process
Furutani, Katsushi
Sato, Hiromichi
Suzuki, Masayuki
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 40 (11-12): : 1093 - 1101
[5] Study of electrical discharge machining using powder-suspended working media
Kozak, J
Rozenek, M
Dabrowski, L
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (11) : 1597 - 1602
[6] Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid
Furutani, K
Saneto, A
Takezawa, H
Mohri, N
Miyake, H
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2001, 25 (02): : 138 - 144
[7] Surface modification by electrical discharge machining with titanium powder suspended in working fluid
Furutani, K
Saneto, A
Takezawa, H
Mohri, N
Miyake, H
PROCEEDINGS OF THE FOURTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1999, : 159 - 162
[8] Working Principle and Performance of Wire Electrical Discharge Machining
Xu CunShan
SPORTS, ARTS MATERIALS AND MANAGEMENT SCIENCE, 2012, 507 : 180 - 183
[9] A Desktop Saw Wire Coating Machine by Using Electrical Discharge Machining
Furutani, Katsushi
Suzuki, Koji
2009 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1-3, 2009, : 2165 - 2170
[10] Experimental investigations of a hybrid machining combining wire electrical discharge machining (WEDM) and fixed abrasive wire saw
Xiaoyu Wu
Shujuan Li
The International Journal of Advanced Manufacturing Technology, 2018, 95 : 2613 - 2623

← 1 2 3 4 5 →