Microstructural and weldability analysis of Inconel617/AISI 310 stainless steel dissimilar welds

被引：69
|
作者：
Hosseini, H. Shah [1 ]
Shamanian, M. [1 ]
Kermanpur, A. [1 ]
机构：
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
来源：
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2016年 / 144卷
关键词：
Weldability; Varestraint test; Dissimilar welding; Inconel; 617; 310 stainless steel; ALLOY; 617;
D O I：
10.1016/j.ijpvp.2016.05.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the microstructural evolutions and weldability of the Inconel 617/310 austenitic stainless steel dissimilar welds were investigated. Three types of filler materials including Inconel 82, Inconel 617 and 310 austenitic stainless steel were used to fabricate dissimilar joints using the gas tungsten arc welding process. Microstructural observations showed distinct cracks in the weldment produced by 310 austenitic stainless steel filler metal. The results of varestraint weldability test showed that the joints produced by Inconel 617 and 310 stainless steel filler metals exhibited the highest and lowest resistance to solidification cracking, respectively. The relatively poor cracking resistance of the welds prepared by 310 stainless steel was attributed to the wide solidification temperature range and presence of low melting point secondary phases. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：18 / 24
页数：7
相关论文
共 50 条
  • [1] Microstructural evolutions in dissimilar welds between AISI 310 austenitic stainless steel and Inconel 657
    H. Naffakh
    M. Shamanian
    F. Ashrafizadeh
    Journal of Materials Science, 2010, 45 : 2564 - 2573
  • [2] Microstructural evolutions in dissimilar welds between AISI 310 austenitic stainless steel and Inconel 657
    Naffakh, H.
    Shamanian, M.
    Ashrafizadeh, F.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (10) : 2564 - 2573
  • [3] Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds
    Hosseini, H. Shah
    Shamanian, M.
    Kermanpur, A.
    MATERIALS CHARACTERIZATION, 2011, 62 (04) : 425 - 431
  • [4] Weldability in dissimilar welds between Type 310 austenitic stainless steel and Alloy 657
    H. Naffakh
    M. Shamanian
    F. Ashrafizadeh
    Journal of Materials Science, 2008, 43 : 5300 - 5304
  • [5] Weldability in dissimilar welds between Type 310 austenitic stainless steel and Alloy 657
    Naffakh, H.
    Shamanian, M.
    Ashrafizadeh, F.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (15) : 5300 - 5304
  • [6] Microstructure and Mechanical Properties of Inconel 617/AISI 310 Electron Beam Welds
    Shamanian, Morteza
    Kangazian, Jalal
    Derakhshi, Mohammad Amir
    Szpunar, Jerzy A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (07): : 3164 - 3173
  • [7] Microstructure and Mechanical Properties of Inconel 617/AISI 310 Electron Beam Welds
    Morteza Shamanian
    Jalal Kangazian
    Mohammad Amir Derakhshi
    Jerzy A. Szpunar
    Metallurgical and Materials Transactions A, 2019, 50 : 3164 - 3173
  • [8] Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657
    Naffakh, H.
    Shamanian, M.
    Ashrafizadeh, F.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (07) : 3628 - 3639
  • [9] Effects of activating flux on Inconel 718 alloy and AISI 304 stainless steel dissimilar TIG welds
    Lin, Hsuan-Liang
    Hsu, Zhau-Hong
    Wang, Wun-Kai
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 518 - +
  • [10] Effect of Bonding Temperature on Microstructure and Mechanical Properties of Dissimilar Joint Between Inconel 617 and Stainless Steel 310
    Vahid Salehi Mobarakeh
    Masoud Atapour
    Behzad Niroumand
    Morteza Shamanian
    Metallography, Microstructure, and Analysis, 2021, 10 : 419 - 429
12345