Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives

被引：25

作者：

Stefani, P. M. ^{[2
]}

Pena, C. ^{[1
]}

Ruseckaite, R. A. ^{[2
]}

Piter, J. C. ^{[3
]}

Mondragon, I. ^{[1
]}

机构：

[1] Univ Pais Vasco Euskal Herriko Unibertsitatea, Polytech Sch, Dept Chem & Environm Engn, Mat & Technol Grp, Donostia San Sebastian 20018, Spain

[2] Univ Mar del Plata, Fac Engn, Natl Res Council CONICET, Res Inst Mat Sci & Technol INTEMA, Mar Del Plata, Buenos Aires, Argentina

[3] Univ Tecnol Nacl, Dept Civil Engn, Fac Reg Concepc Uruguay, Del Uruguay, Entre Rios, Argentina

来源：

BIORESOURCE TECHNOLOGY | 2008年 / 99卷 / 13期

关键词：

plywood; adhesive resol; tannin;

D O I：

10.1016/j.biortech.2007.10.013

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

Phenol-formaldehyde resol containing mimosa tannin extract was employed to produce plywood panels with two plies from Eucalyptus globulus veneers. The effect of processing conditions and tannin content on the gelation. time of the adhesive in the glue line was evaluated by dynamic-mechanical analysis (DMA). These results were related with shear strength and wood failure of glue line in the final panels. Hazardous petrochemical phenol could be partially substituted in resols in industrial applications by addition of mimosa tannin extracts. (C) 2007 Elsevier Ltd. All rights reserved.

引用

页码：5977 / 5980

页数：4

共 8 条

[1] Tannin-based adhesives for bonding high-moisture Eucalyptus veneers: Influence of tannin extraction and press conditions
Vazquez, G
Antorrena, C
Gonzalez, J
Alvarez, JC
HOLZ ALS ROH-UND WERKSTOFF, 1996, 54 (02) : 93 - 97
[2] Tannin-based adhesives for bonding high-moisture Eucalyptus veneers: Influence of tannin extraction and press conditions
Department of Chemical Engineering, University of Santiago de Compostela, Avda. de las Ciencias s/n, 15706 Santiago de Compostela, Spain
Holz Roh Werkst, 2 (93-97):
[3] Longitudinal analysis in the selection of Eucalyptus globulus clones under contrasting water availability conditions
Schmit, Rodolfo
Mora, Freddy
Emhart, Veronica Ingrid
Rubilar, Rafael
Scientia Forestalis/Forest Sciences, 2015, 43 (105): : 217 - 224
[4] Longitudinal analysis in the selection of Eucalyptus globulus clones under contrasting water availability conditions
Schmit, Rodolfo
Mora, Freddy
Emhart, Veronica Ingrid
Rubilar, Rafael
SCIENTIA FORESTALIS, 2015, 43 (105): : 217 - 224
[5] Generation and analysis of an Eucalyptus globulus cDNA library constructed from seedlings subjected to low temperature conditions
Rasmussen-Poblete, Susana
Valdes, Jorge
Gamboa, Maria Cecilia
Valenzuela, Pablo D. T.
Krauskopf, Erwin
ELECTRONIC JOURNAL OF BIOTECHNOLOGY, 2008, 11 (02)
[6] Similarity analysis of essential oils and oleoresins of Eucalyptus globulus leaves produced by distinct methods, solvents and operating conditions
Rodrigues, Vitor H.
de Melo, Marcelo M. R.
Tenberg, Vico
Carreira, Rui
Portugal, Ines
Silva, Carlos M.
INDUSTRIAL CROPS AND PRODUCTS, 2021, 164
[7] CLASSIFICATION OF GENOTYPES OF EUCALYPTUS GLOBULUS UNDER COLD CONDITIONS USING THEIR FREE AMINO ACIDS CONTENT ON LEAVES AND REGULARIZED DISCRIMINANT ANALYSIS (RDA)
Castillo, Rosario Del P.
Contreras, David
Baeza, Jaime
Otto, Matthias
Agurto, Cristian
Freer, Juanita
JOURNAL OF THE CHILEAN CHEMICAL SOCIETY, 2010, 55 (01) : 11 - 18
[8] Statistical analysis of the effect of processing conditions on the strength of thermal point-bonded cotton-based nonwovens
Rong, HM
Leon, RV
Bhat, GS
TEXTILE RESEARCH JOURNAL, 2005, 75 (01) : 35 - 38

← 1 →