Efficiency of PBT Impellers with Different Blade Cross-Sections

被引：3

作者：

Stelmach, Jacek ^{[1
]}

Musoski, Radoslaw ^{[1
]}

Kuncewicz, Czeslaw ^{[1
]}

Jirout, Tomas ^{[2
]}

Rieger, Frantisek ^{[2
]}

机构：

[1] Lodz Univ Technol, Fac Proc & Environm Engn, Wolczanska 213, PL-213 Lodz, Poland

[2] Czech Tech Univ, Fac Mech Engn, Prague 16000, Czech Republic

来源：

ENERGIES | 2022年 / 15卷 / 02期

关键词：

mixer hydrodynamics; mixing efficiency; impellers with different blade cross-sections; TURBULENCE ENERGY-DISSIPATION; MASS-TRANSFER COEFFICIENT; STIRRED TANKS; FLOW; PIV; CIRCULATION; SIMULATION; TURBINE; DESIGN; SUSPENSIONS;

D O I：

10.3390/en15020585

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, the mixing power and the axial and radial velocity distributions were determined for the standard PBT45-6 impeller with inclined blades and for three NACA impellers with airfoil blades. On the basis of the velocity distributions obtained by means of PIV techniques, the pumping efficiency and the size of the secondary circulation for the tested impellers were determined. The next stage was to calculate the efficiency of the impeller operation, in which the comparative criteria were the values of the mixing energy in the form of a dimensional and dimensionless criterion. The lowest mixing energy was obtained for impellers with symmetrical profiled NACA0021 blades, which was 20% lower than the similar mixing energy obtained for the standard PBT45-6 impeller.

引用

页数：19

共 50 条

[1] STRENGTH ANALYSIS OF A BLADE WITH DIFFERENT CROSS-SECTIONS
Somaiday, Bader
Czajka, Ireneusz
Yass, Muhammad A. R.
FACTA UNIVERSITATIS-SERIES ELECTRONICS AND ENERGETICS, 2023, 36 (02) : 239 - 251
[2] Contribution of lift-to-drag ratio on power coefficient of HAWT blade for different cross-sections
Yass, Muhammad A. R.
Rasheed, Raghad Majeed
Muhiesen, Amer Hamad
OPEN ENGINEERING, 2022, 12 (01): : 716 - 728
[3] On hydraulic efficiency of pitched blade impellers
Fort, Ivan
CHEMICAL ENGINEERING RESEARCH & DESIGN, 2011, 89 (6A): : 611 - 615
[4] Analysis of the Cross-Sections Shape and Wiping Angle of a Wiper Blade
Lee, Chae-Eun
Kim, Ho-Kyung
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2020, 13 (02) : 183 - 194
[5] INTERWEAVING OF PARTIAL CROSS-SECTIONS OF DIFFERENT PARITY
DEVRIES, PL
GEORGE, TF
CHEMICAL PHYSICS LETTERS, 1979, 63 (02) : 240 - 242
[6] GROWTH OF SILICON CRYSTALS WITH DIFFERENT CROSS-SECTIONS
SMIRNOV, YM
MASHNITS.AA
KUZNETSO.VA
LEVINZON, DI
SACHKOV, GV
ANTONOV, PI
STEPANOV, AV
IZVESTIYA AKADEMII NAUK SSSR SERIYA FIZICHESKAYA, 1969, 33 (12): : 2003 - +
[7] CALCULATION OF SCATTERING CROSS-SECTIONS FROM ABSORPTION CROSS-SECTIONS
BARFIELD, WD
HUEBNER, WF
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER, 1976, 16 (01): : 27 - 34
[8] TOTAL CROSS-SECTIONS OF NA SCATTERED BY DIFFERENT GASES
RAY, S
BARUA, AK
JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 1979, 46 (01) : 205 - 207
[9] Microbending losses in optical fibers with different cross-sections
Wojcik, G.
Poturaj, K.
Mergo, P.
13TH CONFERENCE ON INTEGRATED OPTICS: SENSORS, SENSING STRUCTURES, AND METHODS, 2018, 10830
[10] INVESTIGATIONS ON TREATMENT OF PINE AND SPRUCE WITH DIFFERENT CROSS-SECTIONS
BAVENDAM.W
WILLEITN.H
KAUNE, P
HOLZ ALS ROH-UND WERKSTOFF, 1965, 23 (09) : 363 - &

← 1 2 3 4 5 →