Vanillin Acrylate-Based Resins for Optical 3D Printing

被引:25
|
作者
Navaruckiene, Aukse [1 ]
Skliutas, Edvinas [2 ]
Kasetaite, Sigita [1 ]
Rekstyte, Sima [2 ]
Raudoniene, Vita [3 ]
Bridziuviene, Danguole [3 ]
Malinauskas, Mangirdas [2 ]
Ostrauskaite, Jolita [1 ]
机构
[1] Kaunas Univ Technol, Dept Polymer Chem & Technol, Radvilenu Rd 19, LT-50254 Kaunas, Lithuania
[2] Vilnius Univ, Fac Phys, Laser Res Ctr, Sauletekis Ave 10, LT-10223 Vilnius, Lithuania
[3] Nat Res Ctr, Biodeteriorat Res Lab, Akad Str 2, LT-08412 Vilnius, Lithuania
基金
欧盟地平线“2020”;
关键词
vanillin dimethacrylate; vanillin diacrylate; photopolymerization; optical 3D printing; direct laser writing; replica molding; PHOTOINITIATED POLYMERIZATION; PHOTOPOLYMERIZATION;
D O I
10.3390/polym12020397
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The investigation of biobased systems as photocurable resins for optical 3D printing has attracted great attention in recent years; therefore, novel vanillin acrylate-based resins were designed and investigated. Cross-linked polymers were prepared by radical photopolymerization of vanillin derivatives (vanillin dimethacrylate and vanillin diacrylate) using ethyl(2,4,6-trimethylbenzoyl)phenylphosphinate as photoinitiator. The changes of rheological properties were examined during the curing with ultraviolet/visible irradiation to detect the influences of solvent, photoinitiator, and vanillin derivative on cross-linking rate and network formation. Vanillin diacrylate-based polymers had higher values of yield of insoluble fraction, thermal stability, and better mechanical properties in comparison to vanillin dimethacrylate-based polymers. Moreover, the vanillin diacrylate polymer film showed a significant antimicrobial effect, only a bit weaker than that of chitosan film. Thermal and mechanical properties of vanillin acrylate-based polymers were comparable with those of commercial petroleum-derived materials used in optical 3D printing. Also, vanillin diacrylate proved to be well-suited for optical printing as was demonstrated by employing direct laser writing 3D lithography and microtransfer molding techniques.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Mechanically tunable resins based on acrylate-based resin for digital light processing (DLP) 3D printing
    Aphiwat Pongwisuthiruchte
    Stephan T. Dubas
    Chuanchom Aumnate
    Pranut Potiyaraj
    Scientific Reports, 12
  • [2] Mechanically tunable resins based on acrylate-based resin for digital light processing (DLP) 3D printing
    Pongwisuthiruchte, Aphiwat
    Dubas, Stephan T.
    Aumnate, Chuanchom
    Potiyaraj, Pranut
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [3] Photopolymerized acrylate-based superelastomers using the CLIP 3D printing technique
    Misichronis, Konstantinos
    Mays, Jimmy
    Saito, Tomonori
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2016, 252
  • [4] Epoxy acrylate-based shape memory polymer via 3D printing
    Shan, W.
    Zhong, H.
    Mo, H.
    Zhao, S.
    Liu, P.
    EXPRESS POLYMER LETTERS, 2021, 15 (12): : 1126 - 1134
  • [5] Isobornyl acrylate-based photosensitive resins for high-resolution digital light processing 3D printing of garnet ceramics
    V. Ermakova, Lydia
    Sokolov, Petr S.
    Smyslova, Valentina G.
    V. Karpyuk, Petr
    Saifutyarov, Rasim R.
    Salykin, Stanislav Y.
    Fedorchenko, Sergey I.
    Koval, Olga Yu
    Retivov, Vasilii M.
    Bondarau, Aliaksei G.
    Mechinsky, Vitaly A.
    V. Korzhik, Mikhail
    OPTICAL MATERIALS, 2025, 159
  • [6] Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts
    Komissarenko, Dmitrii A.
    Sokolov, Petr S.
    Evstigneeva, Anastasiya D.
    Shmeleva, Irina A.
    Dosovitsky, Alexey E.
    MATERIALS, 2018, 11 (12)
  • [7] Curing kinetics of acrylate-based and 3D printable IPNs
    Konuray, Osman
    Salla, Jose M.
    Morancho, Jose M.
    Fernandez-Francos, Xavier
    Garcia-Alvarez, Montserrat
    Ramis, Xavier
    THERMOCHIMICA ACTA, 2020, 692
  • [8] High biorenewable content acrylate photocurable resins for DLP 3D printing
    Lebedevaite, Migle
    Talacka, Vaidas
    Ostrauskaite, Jolita
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (16)
  • [9] Vanillin-based thiol-ene systems as photoresins for optical 3D printing
    Navaruckiene, Aukse
    Kasetaite, Sigita
    Ostrauskaite, Jolita
    RAPID PROTOTYPING JOURNAL, 2020, 26 (02) : 402 - 408
  • [10] Acrylate-Based PEG Hydrogels with Ultrafast Biodegradability for 3D Cell Culture
    Li, Zhili
    Zhou, Dezhong
    BIOMACROMOLECULES, 2024, 25 (09) : 6195 - 6202