Preparation of infrared high radiation coatings from modified spinel NiFe2O4 and its energy saving applications

The NiFe spinel material itself has good thermal stability and emissivity and can be prepared as an infrared high radiation coating for energy saving applications in industrial high temperature furnace applications. In this study, Cr3+ and Cu2+ doped spinel NiFe2O4 was prepared by solid phase reaction at 1250 degrees C for 3 h and the microstructure and physicochemical properties of the powder and coating were characterised by XRD, SEM, EDS and IR radiometry. The effect of Cr3+ and Cu2+ doping on the infrared emissivity of spinel NiFe2O4 was investigated and energy saving assessment was carried out in a resistance furnace. The results show that the doping of Cr3+ and Cu2+ can significantly affect the emissivity of spinel powders in the 2.5-10 mu m band, and the coatings prepared from the four powders have an emissivity of up to 0.95 in the 2.5-10 mu m band. using this high temperature infrared radiation energy saving coating in a resistance furnace resulted in significant energy savings compared to no coating. The furnace was tested for energy saving by holding the furnace for 2 h and 5 h, and the energy saving efficiency reached 20.7% and 17.0% respectively. The coating was subjected to 10 thermal shock tests from room temperature to 700 degrees C. The coating bonded well and had good thermal shock resistance. Therefore, the coating has wide application prospects for energy saving applications in the field of industrial high temperature furnaces.