Experimental Investigation of Different Fineness and Firing Temperatures on Pellets Properties of Different Iron Ore fines from Indian Mines

In India, during mining and ore processing, ore fine generation is a common phenomenon, in which more than 60% of process ore becomes discarded material. To explore the alternative of high-grade ores, mutual replacement with the utility of dump ore fines is the best way. With this perspective, Kiruburu iron ore mine (Iron Ore No.1) and Meghataburu iron ore mine (Iron Ore No.2) dumped fines were chosen for a Blaine no. investigation, in the connection of firing temperatures, to get optimum desirable physical properties, Cold Compression Strength (C.C.S.),and Apparent Porosity (A.P.), with physico-chemical properties, Reducibility Degradation Index (R.D.I.), and Reducibility Index (R.I.). To characterize pellet properties with input variables, a microstructure phase study has been conducted using a scanning electron microscope (S.E.M.), energy dispersive spectroscopy (EDS), and X-ray diffraction analysis (XRD). The Iron Ore No.1 and 2 fine pellets survey showed good, desirable properties, at the Blaine no., of 1678 cm(2)/g and 2311 cm(2)/g (corresponding to 200 mesh size), and the best results are attained at a firing temperature of 1300 degrees C. Thermal kinetic analysis of the heating of pellets has been done to knowthe activation energy of different ore characteristics. The results showed that Iron Ore No.2 pellets have high activation energy.