Clutch plate using woven hybrid composite materials

被引：5
|
作者：
Alavudeen, A. [1 ]
Thiruchitrambalam, M. [2 ]
Athijayamani, A. [3 ]
机构：
[1] Arulmigu Kalasalingam Coll Engn, Dept Mech Engn, Krishnankoil 626190, Tamil Nadu, India
[2] Tamil Nadu Coll Engn, Dept Mech Engn, Coimbatore 641659, Tamil Nadu, India
[3] Alagappa Chettiar Coll Engn & Technol, Dept Mech Engn, Karaikkudi 630004, Tamil Nadu, India
来源：
MATERIALS RESEARCH INNOVATIONS | 2011年 / 15卷 / 04期
关键词：
Hybrid composites; Woven fabrics; Clutch plate; Wear; MECHANICAL-PROPERTIES;
D O I：
10.1179/143307511X13018917925676
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the last era, there has been an increasing interest in composite materials for application in various industries, including medical, aerospace, sports and even household furniture. This paper deals with the design and fabrication of hybrid woven fabric reinforced with polyester composite for clutch plates. The objectives of this investigation are to assess the potential for manufacturing a high quality clutch plate via hand lay-up technique. The wear resistances of the fabricated composites were also tested against the rotating abrasive wheel.
引用
收藏
页码：229 / 234
页数：6
相关论文
共 50 条
  • [1] Modeling and Simulation of Clutch Pressure Plate Casting using Alternate Materials
    Madhuraj, H. N.
    Bharath, M. R.
    ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE, 2018, 1943
  • [2] The design and manufacture of advanced 3D woven hybrid composite materials
    Quinn, J. P.
    McIlhagger, A. T.
    McIlhagger, R.
    Ridgeway, K.
    Ganeshmal, M.
    King, R. S.
    Stewart, G.
    POLYMERS & POLYMER COMPOSITES, 2007, 15 (08): : 597 - 604
  • [3] On the thermoelastic response of woven composite materials
    Fruehmann, R. K.
    Dulieu-Barton, J. M.
    Quinn, S.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, 43 (06): : 435 - 450
  • [4] Damage and failure of composite materials: Application to woven materials
    Chafra, M
    Vinh, T
    Chevalier, Y
    Baltov, A
    PROGRESS IN DURABILITY ANALYSIS OF COMPOSITE SYSTEMS, 1996, : 153 - 157
  • [5] FATIGUE LIFE OF KENAF WOVEN HYBRID COMPOSITE
    Berhan, Mohamad Nor
    Yunus, Syarifah
    Salleh, Zuraidah
    Masdek, Nik Rozlin Nik
    Taib, Yakub Md
    Ghazali, Farizah Adliza
    JURNAL TEKNOLOGI, 2015, 76 (06): : 37 - 41
  • [6] Modelling, evaluation and manufacture of woven composite materials
    Hewitt, JA
    Brown, D
    Clarke, RB
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (04) : 295 - 299
  • [7] Modelling, evaluation and manufacture of woven composite materials
    Univ of Ulster at Jordanstown, Co. Antrim, United Kingdom
    Compos Part A Appl Sci Manuf, 4 (295-299):
  • [8] Damage analysis of woven fabric composite materials
    Dep. of Manufacturing Science, Osaka Univ., Yamadaoka, Suita, 565-0871, Japan
    Zairyo, 9 (1029-1034):
  • [9] Interlaminar fracture properties of weft-knitted/woven fabric interply hybrid composite materials
    Ki-Young Kim
    Lin Ye
    Journal of Materials Science, 2012, 47 : 7280 - 7290
  • [10] COMPUTER MODELING OF WOVEN COMPOSITE-MATERIALS
    HEWITT, JA
    BROWN, D
    CLARKE, RB
    COMPOSITES, 1995, 26 (02): : 134 - 140
12345