Fracture prediction in stretch forming using finite element simulation combined with ductile fracture criterion

被引：21
|
作者：
Takuda, H [1 ]
Mori, K [1 ]
Fujimoto, H [1 ]
Hatta, N [1 ]
机构：
[1] OSAKA UNIV,DEPT ENGN MECH,TOYONAKA,OSAKA 560,JAPAN
来源：
ARCHIVE OF APPLIED MECHANICS | 1997年 / 67卷 / 03期
关键词：
sheet metal forming; forming limit; ductile fracture criterion; FEM; stretch forming;
D O I：
10.1007/s004190050106
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A criterion for ductile fracture is introduced in the finite element simulation of sheet metal forming. From the calculated histories of stress and strain in each element, the fracture initiation site and the critical stroke are predicted by means of the ductile fracture criterion. The calculations are carried out for axisymmetric stretch forming of various aluminium alloy sheets and their laminates clad by mild steel sheets. The predictions so obtained are compared with experimental observations. The results show that the combination of the finite element simulation and the ductile fracture criterion enables the prediction of forming limit in a wide range of sheet metals.
引用
收藏
页码：143 / 150
页数：8
相关论文
共 50 条
  • [1] Fracture prediction in stretch forming using finite element simulation combined with ductile fracture criterion
    H. Takuda
    K. Mori
    H. Fujimoto
    N. Hatta
    Archive of Applied Mechanics, 1997, 67 : 143 - 150
  • [2] Forming Limit Prediction in Bore Expansion by Combination of Finite Element Simulation and Ductile Fracture Criterion
    Takuda, Hirohiko
    Ozawa, Keisuke
    Hama, Takayuki
    Yoshida, Tohru
    Nitta, Jun
    MATERIALS TRANSACTIONS, 2009, 50 (08) : 1930 - 1934
  • [3] Prediction of the forming limit in hydroforming processes using the finite element method and a ductile fracture criterion
    Lei, LP
    Kang, BS
    Kang, SJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 673 - 679
  • [4] Finite element prediction of ductile fracture in sheet metal forming processes
    Teixeira, Pedro
    Santos, A. D.
    Pires, F. M. Andrade
    de Sa, J. M. A. Cesar
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 278 - 281
  • [5] Prediction of forming limit curve at fracture for sheet metal using new ductile fracture criterion
    Dizaji, Shahram Abbasnejad
    Darendeliler, Haluk
    Kaftanoglu, Bilgin
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2018, 69 : 255 - 265
  • [6] Finite element analysis of forming limit of high-strength steel sheets using ductile fracture criterion
    Takuda, H
    Kanie, T
    Isogai, E
    Yoshida, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2005, 91 (06): : 553 - 559
  • [7] New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals
    Lou, Yanshan
    Huh, Hoon
    Lim, Sungjun
    Pack, Keunhwan
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (25) : 3605 - 3615
  • [8] Prediction of forming limit in single point incremental forming with the ductile fracture criterion
    Huang, Y.
    Wang, Y. J.
    Cao, J.
    Li, M.
    PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 929 - 934
  • [9] Prediction of ductile fracture for Al6016-T4 with a ductile fracture criterion: Experiment and simulation
    Zhang, Saijun
    Lu, Yanchun
    Shen, Zhaohui
    Zhou, Chi
    Lou, Yanshan
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2020, 29 (08) : 1199 - 1221
  • [10] Simulation of ductile fracture behavior in shearing: Effect of ductile fracture criterion
    Komori, K
    METAL FORMING 2000, 2000, : 563 - 568
12345