Chemical Modification of Polyamide 6 by Chain Extension with Terephthaloyl-biscaprolactam

被引:20
|
作者
Lu, Chengxiang [1 ]
Ye, Ronggen [1 ]
Yang, Yang [2 ]
Ren, Xiancheng [1 ]
Cai, Xufu [1 ]
机构
[1] Sichuan Univ, Dept Polymer Sci & Engn, Chengdu 610065, Peoples R China
[2] Chinese Acad Sci, Inst Chem, Beijing 100080, Peoples R China
来源
关键词
chain extension; degradation; intrinsic viscosity; PA6; TBC; thermal properties; COUPLING AGENTS; TERMINATED OLIGOMERS; EXTENDERS; POLYESTERS;
D O I
10.1080/00222341003772225
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The chain extension behaviors of terephthaloyl-biscaprolactam (TBC), 2,2'-bis(2-oxazoline)(BOZ), 2,2'-(1,3-phenylene)bis(2-oxazoline)(MPBO), TBC/BOZ, and TBC/MPBO, were studied to evaluate the coupling effect on polyamide 6 (PA6) in a Haake Rheocord mixer and an extruder. For the chain extension of PA6 with TBC only, the coupling results showed that there was an optimal dosage of chain extender, shortage of which caused incomplete chain extensions and excess of which led to more blocking reactions. When the added amount of TBC chain extender in PA6 was 0.684 wt%, the intrinsic viscosity of the PA6 increased from 1.630 to 1.848 dl/g, and the concentration of the amine end groups in the chain-extended PA6 decreased from the initial 5.12 x 10-5 to 1.96 x 10-5 mol/g. However, for the chain extension of PA6 with TBC/BOZ and TBC/MPBO mixtures, the intrinsic viscosity of PA6 increased to 2.189 dl/g and 2.097 dl/g, respectively, while at the same time both the concentration of carboxyl end-groups and amine end-groups of chain-extended PA6 decreased. The effect of temperature on the time needed for the completion of the chain extension reaction was not obvious, and the time needed for the completion of the reaction was about 200sec. The chain-extended PA6 dissociated at high temperature, and the degradation is suggested to proceed simultaneously from the onset of the chain extension reaction. Furthermore, the effects of chain extenders on the thermal properties of chain-extended PA6 were investigated. The thermal stability of chain-extended PA6 was slightly improved.
引用
收藏
页码:350 / 362
页数:13
相关论文
共 50 条
  • [1] Chemical modification of polyamide-6 by chain extension with 2,2'-bis(2-oxazoline)
    Lu, Chengxiang
    Chen, Tan
    Zhao, Xuzhong
    Ren, Xiancheng
    Cai, Xufu
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2007, 45 (15) : 1976 - 1982
  • [2] Chain extension of polyamide 6/organoclay nanocomposites
    Tuna, Basak
    Benkreira, Hadj
    POLYMER ENGINEERING AND SCIENCE, 2019, 59 (06): : 1233 - 1241
  • [3] Chain extension of polyamide 6 using bisoxazoline coupling agents
    Lu, Chengxiang
    Chen, Li
    Ye, Ronggen
    Cai, Xufu
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2008, 47 (05): : 986 - 999
  • [4] Thermo-mechanical properties of Polyamide 6 chemically modified by chain extension with Polyamide/Polycarbonate blend
    M. Buccella
    A. Dorigato
    E. Pasqualini
    M. Caldara
    L. Fambri
    Journal of Polymer Research, 2012, 19
  • [5] Chain extension of oligoamide or polyamide in an extruder
    Schacker, O
    Braun, D
    Hellmann, GP
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2001, 286 (07) : 382 - 387
  • [6] Thermo-mechanical properties of Polyamide 6 chemically modified by chain extension with Polyamide/Polycarbonate blend
    Buccella, M.
    Dorigato, A.
    Pasqualini, E.
    Caldara, M.
    Fambri, L.
    JOURNAL OF POLYMER RESEARCH, 2012, 19 (08)
  • [7] Chain extension of polyamide 6 using multifunctional chain extenders and reactive extrusion for melt foaming
    Xu, Menglong
    Yan, Haichao
    He, Quanjin
    Wan, Chen
    Liu, Tao
    Zhao, Ling
    Park, Chul B.
    EUROPEAN POLYMER JOURNAL, 2017, 96 : 210 - 220
  • [8] Chain extension of polyamide 6 using multifunctional chain extenders and reactive extrusion for melt foaming
    Xu, Menglong
    Liu, Tao
    Park, Chul B.
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 255
  • [9] Studies on chain scission and extension of polyamide 6 melt in the presence of ultrasonic irradiation
    Li, J
    Liang, M
    Guo, SY
    Lin, Y
    POLYMER DEGRADATION AND STABILITY, 2004, 86 (02) : 323 - 329
  • [10] Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion
    Cai, Jianan
    Liu, Zhipeng
    Cao, Bo
    Guan, Xiaoxiao
    Liu, Shumei
    Zhao, Jianqing
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2020, 59 (32) : 14334 - 14343