The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel

被引：37
|
作者：
Sun, L. [1 ]
Muszka, K. [1 ]
Wynne, B. P. [1 ]
Palmiere, E. J. [1 ]
机构：
[1] Univ Sheffield, Inst Microstruct & Mech Proc Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
SCRIPTA MATERIALIA | 2011年 / 64卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
Austenite; Dislocation boundaries; Hot working; Strain path; Electron backscattering diffraction (EBSD); INTERSTITIAL-FREE STEEL; ULTRAFINE FERRITE; HOT TORSION; FCC METALS; INDUCED PRECIPITATION; ALUMINUM; RECRYSTALLIZATION; DEFORMATION; ORIENTATION; MICROSTRUCTURE;
D O I：
10.1016/j.scriptamat.2010.10.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of large strain and strain path reversal on deformation microstructure development in austenite below recrystallization temperature were studied by hot torsion using an Fe-30 wt% Ni model alloy. Results show that high-angle boundaries (HABs) can be generated by both dislocation accumulation and subgrain rotation. Multiple strain reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same strain. This is attributed to subgrain rotation mechanism being less effective at small strains. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：280 / 283
页数：4
相关论文
共 50 条
  • [1] Effect of the strain reversal on grain boundary character and substructure development on a hot worked austenitic stainless steel
    Jorge-Badiola, D
    Iza-Mendia, A
    Gutiérrez, I
    ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, 2005, 495-497 : 1031 - 1036
  • [2] Migration of an incommensurate high-angle grain boundary
    V. G. Kul’kov
    A. S. Polyakov
    Russian Metallurgy (Metally), 2012, 2012 (4) : 263 - 268
  • [3] Migration of an Incommensurate High-Angle Grain Boundary
    Kul'kov, V. G.
    Polyakov, A. S.
    RUSSIAN METALLURGY, 2012, (04): : 263 - 268
  • [4] The effect of strain path reversal during hot rolling on austenitic stainless steel
    Higginson, RL
    Sellars, SM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2): : 323 - 330
  • [5] High angle boundary formation by grain subdivision in equal channel angular extrusion
    Sun, PL
    Kao, PW
    Chang, CP
    SCRIPTA MATERIALIA, 2004, 51 (06) : 565 - 570
  • [6] Latent Order in High-Angle Grain Boundary of GaN
    Yoon, Sangmoon
    Yoo, Hyobin
    Kang, Seoung-Hun
    Kim, Miyoung
    Kwon, Young-Kyun
    SCIENTIFIC REPORTS, 2018, 8
  • [7] Latent Order in High-Angle Grain Boundary of GaN
    Sangmoon Yoon
    Hyobin Yoo
    Seoung-Hun Kang
    Miyoung Kim
    Young-Kyun Kwon
    Scientific Reports, 8
  • [8] The effect of strain path on the rate of formation of high angle grain boundaries during ECAE
    Prangnell, PB
    Gholinia, A
    Markushev, MV
    INVESTIGATIONS AND APPLICATIONS OF SEVERE PLASTIC DEFORMATION, 2000, 80 : 65 - 71
  • [9] HIGH-ANGLE GRAIN-BOUNDARY MIGRATION IN ALUMINUM BICRYSTALS
    GOTTSTEIN, G
    MOLODOV, DA
    CZUBAYKO, U
    SHVINDLERMAN, LS
    JOURNAL DE PHYSIQUE IV, 1995, 5 (C3): : 89 - 106
  • [10] HIGH-ANGLE BOUNDARY ROLE IN SPHERICAL GRAPHITE FORMATION
    KOSEVICH, VM
    LYUBCHENKO, AP
    GRIGOROV, SN
    UMANSKIY, GP
    FIZIKA METALLOV I METALLOVEDENIE, 1980, 49 (04): : 827 - 836
12345