Ductility of an Al-Cu alloy produced by the powder metallurgy route

被引：0
|
作者：
Maire, E
Wilkinson, DS
Embury, JD
Henein, H
机构：
来源：
EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES | 1997年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The powder metallurgy route is used to produce bulk materials from rapidly solidified granules made of an Al-17wt.%Cu alloy. Different thermomechanical treatments are then investigated to improve the final ductility of the material. Channel-die (CD) forging experiments are performed at 500 degrees C. Eight consecutive runs with compression ratio of 70% are applied for the CD treatment. A bar is also extruded with a 40:1 ratio. The ductility after these treatments is assessed by means of the ring expansion test. CD compression at 500 OC and extrusion both increase the ductility, extrusion being more efficient.
引用
收藏
页码：361 / 364
页数：4
相关论文
共 50 条
  • [1] Wear behavior of Al-Cu and Al-Cu/SiC components produced by powder metallurgy
    Hassan, Adel Mahamood
    Mayyas, Ahmad Turki
    Alrashdan, Abdalla
    Hayajneh, Mohammed T.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (15) : 5368 - 5375
  • [2] Electroless Cu plating on the microstructure and hardness of Al-Cu powder metallurgy alloy
    Zhang, Chunzhi
    Kong, Lingliang
    Li, Huiping
    Wu, Yumei
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08):
  • [3] Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy
    Yuan, Chao
    Zhang, Zhiming
    Tan, Zhanqiu
    Xu, Lang
    Zhang, Shuyan
    Fan, Genlian
    Zhang, Peng
    Li, Zhiqiang
    MATERIALS TODAY COMMUNICATIONS, 2021, 26 (26):
  • [4] An analysis of hot deformation of an Al-Cu-Mg alloy produced by powder metallurgy
    Bardi, F
    Cabibbo, M
    Evangelista, E
    Spigarelli, S
    Vukcevic, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 339 (1-2): : 43 - 52
  • [5] CREEP AND DUCTILITY IN AN AL-CU SOLID-SOLUTION ALLOY
    CHAUDHURY, PK
    MOHAMED, FA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (12): : 2105 - 2114
  • [6] Properties of Soldering Cu/Fe Alloy Produced by Powder Metallurgy
    Sueyoshi, Hidekazu
    Ishii, Ryosuke
    Fukudome, Hisayoshi
    Mizokuchi, Shinji
    Wakabayashi, Toshio
    Saikusa, Kazuya
    MATERIALS TRANSACTIONS, 2008, 49 (12) : 2881 - 2886
  • [7] Properties of Soldering Cu/Fe Alloy Produced by Powder Metallurgy
    Sueyoshi, Hidekazu
    Ishii, Ryosuke
    Fukudome, Hisayoshi
    Mizokuchi, Shinji
    Wakabayashi, Toshio
    Saikusa, Kazuya
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (06) : 414 - 420
  • [8] Microstructural Characterization of Al0.5CrFeNiTi High Entropy Alloy Produced by Powder Metallurgy Route
    Geambazu, Laura Elena
    Talpeanu, Dorinel
    Bololoi, Robert Viorel
    Manea, Ciprian Alexandru
    Bololoi, Alina Elena
    Miculescu, Florin
    Patroi, Delia
    Cojocaru, Vasile Danut
    MATERIALS, 2023, 16 (21)
  • [9] Wear behavior of Al–Cu and Al–Cu/SiC components produced by powder metallurgy
    Adel Mahamood Hassan
    Ahmad Turki Mayyas
    Abdalla Alrashdan
    Mohammed T. Hayajneh
    Journal of Materials Science, 2008, 43 : 5368 - 5375
  • [10] Simultaneously increasing the strength and ductility of the modified casting Al-Cu alloy
    Zhao W.
    Wang H.
    Wang J.
    Li Y.
    Jiang Q.
    J Mater Res, 2008, 4 (1076-1081): : 1076 - 1081
12345