Intrinsic Fabry-Perot Cavity Sensor Based on Etched Multimode Graded Index Fiber for Strain and Temperature Measurement

被引：53
|
作者：
Tafulo, Paula A. R. [1 ]
Jorge, Pedro. A. S. [1 ]
Santos, Jose Luis [1 ,2 ]
Araujo, Francisco M. [1 ,3 ]
Frazao, Orlando [1 ]
机构：
[1] INESC Porto, UOSE, P-4150179 Oporto, Portugal
[2] Univ Porto, Dept Phys, P-4150179 Oporto, Portugal
[3] FiberSensing, P-4470640 Maia, Portugal
来源：
IEEE SENSORS JOURNAL | 2012年 / 12卷 / 01期
关键词：
Fabry-Perot interferometer; fiber-optic sensors; multimode optical fiber; strain; temperature; INTERFEROMETER;
D O I：
10.1109/JSEN.2011.2107737
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Two Fabry-Perot interferometers based on chemical etching in multimode graded index fibers are fabricated and their response to temperature and strain are compared. Chemical etching is applied in the graded index fiber end creating an air cavity. The interferometric cavity is formed when the graded index fiber with the air concavity is spliced to a single-mode fiber. The intrinsic sensors present high sensitivity to strain and low sensitivity to temperature. For the 62.5 mu m core fiber, sensitivities of 6.99 pm/mu epsilon and, 0.95 pm/degrees C were obtained for strain and temperature, respectively. The sensor based in the 50 mu m core fiber, on the other hand, presented sensitivities of 4.06 pm/mu epsilon and -0.84 pm/degrees C for strain and temperature, respectively.
引用
收藏
页码：8 / 12
页数：5
相关论文
共 50 条
  • [1] Intrinsic Fabry-Perot cavity sensor based on chemical etching of a multimode graded index fiber spliced to a single mode fiber
    Tafulo, Paula A. R.
    Frazao, O.
    Jorge, P. A. S.
    Araujo, F. M.
    FOURTH EUROPEAN WORKSHOP ON OPTICAL FIBRE SENSORS, 2010, 7653
  • [2] Fiber-optic Fabry-Perot strain sensor based on graded-index multimode fiber
    Zhao, Tian
    Gong, Yuan
    Rao, Yunjiang
    Wu, Yu
    Ran, Zengling
    Wu, Huijuan
    CHINESE OPTICS LETTERS, 2011, 9 (05)
  • [3] Intrinsic Fabry-Perot fiber sensor for temperature and strain measurements
    Huang, ZY
    Zhu, YZ
    Chen, XP
    Wang, AB
    IEEE PHOTONICS TECHNOLOGY LETTERS, 2005, 17 (11) : 2403 - 2405
  • [4] Temperature and strain fiber sensor design based on microstructural Fabry-Perot cavity
    Li, Jin
    Wang, Yannan
    TWELFTH INTERNATIONAL CONFERENCE ON INFORMATION OPTICS AND PHOTONICS (CIOP 2021), 2021, 12057
  • [5] Fabry-Perot Fiber Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on an In-Fiber Ellipsoidal Cavity
    Wang, Tingting
    Wang, Ming
    IEEE PHOTONICS TECHNOLOGY LETTERS, 2012, 24 (19) : 1733 - 1736
  • [6] Dislocated Fabry-Perot fiber cavity for strain measurement
    Liu, Jing
    Liu, Ye
    Wang, D. N.
    2017 16TH INTERNATIONAL CONFERENCE ON OPTICAL COMMUNICATIONS & NETWORKS (ICOCN 2017), 2017,
  • [7] Fabry-Perot Cavity Based on a Suspended-Core Fiber for Strain and Temperature Measurement
    Frazao, Orlando
    Aref, S. H.
    Baptista, Jose M.
    Santos, Jose L.
    Latifi, H.
    Farahi, F.
    Kobelke, Jens
    Schuster, Kay
    IEEE PHOTONICS TECHNOLOGY LETTERS, 2009, 21 (17) : 1229 - 1231
  • [8] Fiber-optic Fabry-Perot sensor based on graded-index multimode fiber: numerical simulations and experiments
    Gong, Yuan
    Zhao, Tian
    Rao, Yun-Jiang
    Wu, Yu
    Guo, Yu
    21ST INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS, 2011, 7753
  • [9] Simultaneous measurement of temperature and strain based on all-fiber Fabry-Perot sensor
    Jiao, Yuzhu
    Tian, Jiajun
    Yao, Yong
    AOPC 2017: FIBER OPTIC SENSING AND OPTICAL COMMUNICATIONS, 2017, 10464
  • [10] A Novel Optical Fiber Temperature Sensor Based on Fabry-Perot Cavity
    Zhao, Yong
    Wang, Dan
    Lv, Riqing
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2013, 55 (10) : 2487 - 2490
12345