Synthesis and consolidation of TiN/TiB2 ceramic composites via reactive spark plasma sintering

被引:29
|
作者
Khobta, I. [1 ]
Petukhov, O. [1 ]
Vasylkiv, O. [2 ]
Sakka, Y. [2 ]
Ragulya, A. [1 ]
机构
[1] Natl Acad Sci Ukraine, Inst Problems Mat Sci, UA-03680 Kiev 142, Ukraine
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
关键词
Composite materials; Sintering; Mechanical properties; Microstructure; Scanning electron microscopy (SEM); X-ray diffraction; TITANIUM HYDRIDE; BORON-NITRIDE; TIN-TIB2; DENSIFICATION; GROWTH;
D O I
10.1016/j.jallcom.2010.10.198
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The simultaneous synthesis and densification of TiN/TiB2 ceramic composites via reactive spark plasma sintering (RSPS) was investigated. Different component ratios (TiH2/BN (TiN, B)) and heating rates (112.5-300 degrees C/min) were used to initiate the chemical reaction for TiN/TiB2 synthesis. The omit RSPS process was revealed to have three stages, which are described separately. The relationships between the RSPS conditions, the microstructure and the properties of sintered ceramic composites were established. A Vickers hardness of 16-25 GPa and a fracture toughness of 4-6.5 MPa m(1/2) were measured for various compositions. Sintered ceramic composites containing 36 wt% TiB2 with the highest relative density of 97.4 +/- 0.4% and an average grain size of 150-550 nm have been obtained. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:1601 / 1606
页数:6
相关论文
共 50 条
  • [1] Synthesis of TiB2-TiN composites by reactive spark plasma sintering of BN and Ti
    Sugiyama, Shigeaki
    Asari, Koichi
    Taimatsu, Hitoshi
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1999, 46 (04): : 383 - 389
  • [2] CONSOLIDATION OF TiB2 CERAMICS BY USING SPARK PLASMA SINTERING
    Turan, Ahmet
    Sahin, Filiz Cinar
    Goller, Gultekin
    Yucel, Onuralp
    TMS 2014 SUPPLEMENTAL PROCEEDINGS, 2014, : 1101 - 1107
  • [3] Synthesis of the TiN-TiB2 Ceramic Composites under Various Spark Plasma Sintering Conditions
    Khobta, I. V.
    Petukhova, A. S.
    Ragulya, A. V.
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2008, 30 : 561 - 569
  • [4] SYNTHESIS OF THE TiN-TiB2 CERAMIC COMPOSITES UNDER VARIOUS SPARK PLASMA SINTERING CONDITIONS
    Petukhov, O.
    Khobta, I.
    Ragulya, A.
    Sakka, Y.
    ARCHIVES OF METALLURGY AND MATERIALS, 2009, 54 (04) : 957 - 962
  • [5] Dense in situ TiB2/TiN and TiB2/TiC ceramic matrix composites:: reactive synthesis and properties
    Gotman, I
    Travitzky, NA
    Gutmanas, EY
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 127 - 137
  • [6] Dense in situ TiB2/TiN and TiB2/TiC ceramic matrix composites: reactive synthesis and properties
    Technion, Haifa, Israel
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1 (127-137):
  • [7] Fabrication of TiB2/TiC Composites by Spark Plasma Sintering
    Ma Zhi-Qiang
    Ji Ying-Hu
    Wang Lian-Jun
    JOURNAL OF INORGANIC MATERIALS, 2012, 27 (09) : 961 - 964
  • [8] Spark plasma sintering of TiN-TiB2 composites
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (02) : 197 - 203
  • [9] B deficiency in TiB2 and B solid solution in TiN in TiN-TiB2 composites prepared by spark plasma sintering
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (16) : 4021 - 4024
  • [10] Influence of ball milling on spark plasma sintering TiB2 ceramic
    Zhang, Dongming
    Fu, Zhengyi
    Tang, Tian
    Pang, Tingting
    Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology, 2002, 24 (05):