Ignition phenomena and controlled firing of reaction-bonded aluminum oxide

被引：7
|
作者：
Watson, MJ [1 ]
Harmer, MP [1 ]
Chan, HM [1 ]
Caram, HS [1 ]
机构：
[1] Lehigh Univ, Mat Res Ctr, Bethlehem, PA 18015 USA
来源：
ACTA MATERIALIA | 2001年 / 49卷 / 06期
关键词：
firing; computer simulation; kinetics; thermally activated processes; high temperature; reaction-bonded aluminum oxide;
D O I：
10.1016/S1359-6454(00)00343-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The reaction-bonded aluminum oxide (RBAO) process utilizes the oxidation of attrition-milled Al/Al2O3/ZrO2 powder compacts, that are heat treated in air, to make alumina-based ceramics. A simultaneous mass and energy balance has been used to model the propagation of the ignition front that has been observed during reaction-bonding. The model is used to determine conditions under which ignition can be avoided. (C) 2001 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1095 / 1103
页数：9
相关论文
共 50 条
  • [1] Feedback-controlled firing of reaction-bonded aluminum oxide
    Watson, MJ
    Chan, HM
    Harmer, MP
    Caram, HS
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (12) : 3380 - 3387
  • [2] Controlled firing of reaction-bonded aluminum oxide (RBAO) ceramics: Part II, experimental results
    Gaus, SP
    Sheedy, PM
    Caram, HS
    Chan, HM
    Harmer, MP
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (04) : 909 - 915
  • [3] FAST FIRING OF REACTION-BONDED ALUMINUM-OXIDE RBAO COMPOSITES
    GARCIA, DE
    WENDORFF, J
    JANSSEN, R
    CLAUSSEN, N
    JOURNAL OF MATERIALS SCIENCE, 1995, 30 (20) : 5121 - 5124
  • [4] Controlled firing of reaction-bonded aluminum oxide (RBAO) ceramics: Part I, continuum-model predictions
    Gaus, SP
    Harmer, MP
    Chan, HM
    Caram, HS
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (04) : 897 - 908
  • [5] Seeding of the reaction-bonded aluminum oxide process
    Suvaci, E
    Messing, GL
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (03) : 657 - 659
  • [6] Effects of milling liquid on the reaction-bonded aluminum oxide process
    Watson, MJ
    Chan, HM
    Harmer, MP
    Caram, HS
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (08) : 2053 - 2060
  • [7] MECHANISMS AND KINETICS OF REACTION-BONDED ALUMINUM-OXIDE CERAMICS
    WU, SX
    HOLZ, D
    CLAUSSEN, N
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (04) : 970 - 980
  • [8] Effects of aluminum and zirconia contents on the sintering of reaction-bonded aluminum oxide ceramics
    Sheedy, PM
    Caram, HS
    Chan, HM
    Harmer, MP
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (08) : 2046 - 2052
  • [9] THE POSSIBILITY OF THE PRODUCTION OF REACTION-BONDED ALUMINUM-OXIDE USING MICROWAVE-ENERGY
    PARK, JH
    AHN, ZS
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1994, 13 (09) : 650 - 652
  • [10] Conventional and microwave-induced sintering mechanisms for reaction-bonded aluminum oxide with zirconium oxide additions
    Kato, M
    Goto, Y
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (01) : 65 - 69
12345