Effect of heat treatment on hydrogen trapping in alloy K-500

被引:0
|
作者
Pound, BG [1 ]
机构
[1] SRI Int, Mat Res Ctr, Menlo Park, CA 94025 USA
关键词
alloy K-500; copper-nickel alloys; hydrogen embrittlement; hydrogen trapping; potentiostatic pulsing;
D O I
10.5006/1.3284821
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of heat treatment on irreversible hydrogen trapping was investigated for alloy K-500 (UNS N05500) with a goal of providing more detailed insight into factors governing the intrinsic susceptibility to hydrogen embrittlement (HE). A potentiostatic pulse technique was used to determine the irreversible trapping constants (k) and hydrogen entry fluxes for annealed, annealed and aged (AA), and 12-h and 16-h direct-aged (DA) specimens of cold-drawn alloy K-500 that had been used earlier to provide as-received (unannealed, cold-drawn) and 8-h DA specimens. The type of heat treatment produced marked differences in irreversible trapping. Intrinsic susceptibility to HE, as defined by k, was increased considerably by annealing. Aging had a negligible effect on the intrinsic susceptibility for the annealed alloy, but resulted in a sizable increase for the unannealed alloy if performed for extended times, Intrinsic susceptibilities for the AA and DA alloys were correlated with the observed resistances to HE, implying that the previously reported decrease in resistance to HE (based upon tensile strength) produced by annealing was caused to a large extent, if not entirely, by a change in the irreversible traps.
引用
收藏
页码:988 / 995
页数:8
相关论文
共 50 条
  • [1] The effect of isothermal heat treatment on hydrogen environment-assisted cracking susceptibility in Monel K-500
    Harris, Zachary D.
    Burns, James T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764
  • [2] THE EFFECT OF THE MICROSTRUCTURE ON THE TRIBOLOGICAL PROPERTIES OF THE MONEL K-500 ALLOY
    Krawczyk, Janusz
    Frocisz, Lukasz
    Matusiewicz, Piotr
    Madej, Marcin
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1326 - 1334
  • [3] The effect of heat-to-heat variations in metallurgy and hydrogen-metal interactions on the hydrogen embrittlement of Monel K-500
    Troconis, B. C. Rincon
    Harris, Z. D.
    Ha, H.
    Burns, J. T.
    Scully, J. R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 703 : 533 - 550
  • [4] EFFECTS OF HYDROGEN ON ENGINEERING PROPERTIES OF MONEL NICKEL-COPPER ALLOY K-500
    HARRIS, JA
    STEPHENS, CD
    SCARBERR.RC
    CORROSION, 1972, 28 (02) : 57 - &
  • [5] On the tendency to aging crack in monel alloy K-500
    Yuan, Chao
    Yang, Hongcai
    Liu, Shigui
    Dongbei Daxue Xuebao/Journal of Northeastern University, 1994, 15 (02):
  • [6] The Effect of Microstructural Variation on the Hydrogen Environment-Assisted Cracking of Monel K-500
    Zachary D. Harris
    Justin D. Dolph
    Greger L. Pioszak
    Brendy C. Rincon Troconis
    John R. Scully
    James T. Burns
    Metallurgical and Materials Transactions A, 2016, 47 : 3488 - 3510
  • [7] Hydrogen diffusion and trapping in a precipitation-hardened nickel-copper-aluminum alloy Monel K-500 (UNS N05500)
    Ai, Jia-He
    Ha, Hung M.
    Gangloff, Richard P.
    Scully, John R.
    ACTA MATERIALIA, 2013, 61 (09) : 3186 - 3199
  • [8] A study on hot deformation behaviour of alloy Monel K-500
    DING Yan
    BaosteelTechnicalResearch, 2012, 6 (01) : 61 - 64
  • [9] Experimental Research on Heating Performance of Monel K-500 Alloy
    Zhang, Xiaoping
    Chen, Wenzhang
    ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES II, 2012, 572 : 273 - +
  • [10] The Effect of Microstructural Variation on the Hydrogen Environment-Assisted Cracking of Monel K-500
    Harris, Zachary D.
    Dolph, Justin D.
    Pioszak, Greger L.
    Troconis, Brendy C. Rincon
    Scully, John R.
    Burns, James T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (07): : 3488 - 3510