Calculating and Parametric Analysis of the Work of the Air Single-stage Medium Pressure Reciprocating Compressor of on the Basis of the Oil-free Long-stroke Slow-speed Stage

被引：2

作者：

Yusha, V. L. ^{[1
]}

Busarov, S. S. ^{[1
]}

Vasil'ev, V. K. ^{[1
]}

Gromov, A. Yu. ^{[1
]}

Nedovenchanyj, A. V. ^{[1
]}

机构：

[1] Omsk State Tech Univ, Pr Mira 11, Omsk 644050, Russia

来源：

OIL AND GAS ENGINEERING (OGE-2017) | 2017年 / 1876卷

关键词：

slow-speed reciprocating compressor; operating processes; heat exchange; discharge temperature; indicator diagram; temperature diagram; mathematical modeling; medium pressure;

D O I：

10.1063/1.4998861

中图分类号：

TE [石油、天然气工业];

学科分类号：

0820 ;

摘要：

The computational and parametric analysis of the of the operating process efficiency in an airless, slow-speed, long-stroke stage of a medium-pressure compressor unit was carried out. The influence on the discharge temperature, the indicator efficiency and the feed rate of the main structural and mode parameters of the stage are considered. It is shown that cycle time, cylinder diameter and stroke have significant influence on the economical efficiency of the operating process and the temperature mode of the stage and can be regarded as optimization parameters while developing a reciprocating stage of such type.

引用

页数：8

共 3 条

[1] Analysis of the Efficiency of External Cooling of Slow-speed Long-stroke Oil-free Reciprocating Compressor Stages with Asymmetric Design Scheme
Yusha, V. L.
Busarov, S.
Nedovenchanyi, A. V.
Titov, D. S.
OIL AND GAS ENGINEERING (OGE-2018), 2018, 2007
[2] Experimental Research of the Operating Processes of Slow-speed Long-Stroke Oil-free Reciprocating Compressor Stages at Discharge Pressures up to 10 MPa
Yusha, V. L.
Busarov, S. S.
Nedovenchanyj, A. V.
Goshlya, R. Y.
OIL AND GAS ENGINEERING (OGE-2018), 2018, 2007
[3] Assessment of the Relationship between the Law of Motion of the Slow-Speed Long-Stroke Stage Piston and the Characteristics of the Compressor Unit Drive
Yusha, V. L.
Busarov, S. S.
Nedovenchanchanyi, A. V.
OIL AND GAS ENGINEERING (OGE-2019), 2019, 2141

← 1 →