Welding materials used to increase service life of agricultural machinery processing soil

被引：0

作者：

Hrabe, Petr ^{[1
]}

Kolar, Viktor ^{[1
]}

Kabutey, Abraham ^{[2
]}

Sedlacek, Ales ^{[2
]}

机构：

[1] Czech Univ Life Sci Prague, Fac Engn, Dept Mat Sci & Mfg, Kamycka 129, Prague 6, Czech Republic

[2] Czech Univ Life Sci Prague, Fac Engn, Dept Mech Engn, Kamycka 129, Prague 6, Czech Republic

来源：

INNOVATIVE TECHNOLOGIES IN ENGINEERING PRODUCTION (ITEP'18) | 2018年 / 244卷

关键词：

abrasive wear; ploughshare; statistics; REDUCTION; WEAR;

D O I：

10.1051/matecconf/201824401002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Intensive abrasive wear occurs in soil-treatment machines. This article is focused on increasing the service life of ploughs by the welding material. The welding material is applied at a 45 degrees angle to the tool. This material is abrasive wear resistant. The welding material was applied parallel to the head of ploughshares with spacing of 60 mm. Carbide materials were used (SK 258 TiC-O, SK 900-O, SK A43-O, SK 299-O, SK A45-O, OK TUBRODUR 15.82, SK 258 TiC-O). The tested ploughshare variants were wearing the same when were used the welding material and the standard.

引用

页数：6

共 20 条

[1] DECONTAMINATION OF PLANT AND MACHINERY USED IN THE PROCESSING OF RADIOACTIVE LUMINESCENT MATERIALS
HANEBECK, N
TUSCHE, R
CHEMIE INGENIEUR TECHNIK, 1985, 57 (01) : 39 - 40
[2] The welding program optimization of a S355 steel assembly used in agricultural machinery
Muncut, Elena-Stela
Culda, Lavinia-Ioana
Erdodi, Geza-Mihai
Sima, Gheorghe
9TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2019): TRENDS IN NEW INDUSTRIAL REVOLUTION, 2019, 290
[3] Research regarding the increase of turning tool service life while processing hard materials
Anghel, M
Munteanu, V
Sosai, G
Preda, A
Rogojanu, I
ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 1125 - 1129
[4] POSSIBILITIES OF ENVIRONMENT AND SOIL PROTECTION BY MEANS OF GPS NAVIGATION USED IN AGRICULTURAL MACHINERY
Kroulik, Milan
Kviz, Zdenek
Chyba, Jan
TRENDS IN AGRICULTURAL ENGINEERING 2013, 2013, : 364 - 367
[5] Historical increase in agricultural machinery weights enhanced soil stress levels and adversely affected soil functioning
Keller, Thomas
Sandin, Maria
Colombi, Tino
Horn, Rainer
Or, Dani
SOIL & TILLAGE RESEARCH, 2019, 194
[6] Evaluating Service Life of Metal Processing Machinery: An Intelligent Monitoring Perspective
Wang, Hsiao-Yu
Hung, Ching-Hua
Chen, Cheng-Hui
MOBILE NETWORKS & APPLICATIONS, 2024, 29 (03): : 935 - 946
[7] Research on HMCVT Parameter Design Optimization Based on the Service Characteristics of Agricultural Machinery in the Whole Life Cycle
Cheng, Zhun
Lu, Zhixiong
MACHINES, 2023, 11 (06)
[8] The Influence of Microstructure on Abrasive Wear Micro-Mechanisms of the Claddings Produced by Welding Used in Agricultural Soil
Krolicka, Aleksandra
Szczepanski, Lukasz
Konat, Lukasz
Stawicki, Tomasz
Kostencki, Piotr
MATERIALS, 2020, 13 (08)
[9] SELECTION AND APPLICATION OF WEAR-RESISTANT MATERIALS TO INCREASE SERVICE LIFE OF COMPONENTS
MARTINELLA, R
CERAMICS INTERNATIONAL, 1993, 19 (06) : 375 - 389
[10] Development of overlaying welding materials and process for long service life continuous casting rolls
Sun, Da-Le
Li, Xiao-Bing
Yao, Li-Song
Liu, Cheng-Min
Dongbei Daxue Xuebao/Journal of Northeastern University, 2008, 29 (05): : 693 - 696

← 1 2 →