Predictive profile control for a hot strip mill

被引：1
|
作者：
Mroz, T. [1 ,2 ]
Hearns, G. [1 ]
Bilkhu, T. [1 ]
Burnham, K. J. [2 ]
Linden, J. G. [2 ]
机构：
[1] Converteam, Boughton Rd, Rugby CV21 1BU, England
[2] Coventry Univ, Control Theory & Applicat Ctr, Coventry CV1 5FB, W Midlands, England
来源：
ICSENG 2008: INTERNATIONAL CONFERENCE ON SYSTEMS ENGINEERING | 2008年
关键词：
D O I：
10.1109/ICSEng.2008.90
中图分类号：
TP3 [计算技术、计算机技术];
学科分类号：
0812 ;
摘要：
This paper discusses the control of the strip profile in a three stand hot strip mill. The demand for higher quality requires a control system with high accuracy and fast response. Inherent transport delays in this process motivates the design of the controller to have a predictive capability. Due to the physical limitations of the actuators the measurements of the strip profile are filtered to ensure the control actions will be feasible. The tuning and robustness of a predictive controller and a PID controller is demonstrated in the frequency domain. The interactions of the profile control with the other mill control systems are discussed. Other salient points of this method including easy installation in existing mills with appropriate actuators, without any modifications.
引用
收藏
页码：260 / +
页数：2
相关论文
共 50 条
  • [1] PROFILE AND SHAPE CONTROL IN HOT STRIP MILL
    TAKAHASHI, R
    NUNOKAWA, T
    TAKEDA, E
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1988, 74 (07): : 1402 - 1409
  • [2] DEVELOPMENT OF AUTOMATIC PROFILE AND SHAPE CONTROL-SYSTEM IN HOT STRIP MILL .1. PROFILE CONTROL IN HOT STRIP MILL
    TAKAHASHI, R
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1222 - 1222
  • [3] Nonlinear predictive control of hot strip rolling mill
    Cannon, M
    Kouvaritakis, B
    Grimble, M
    Bulut, B
    INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 2003, 13 (3-4) : 365 - 380
  • [4] Model Predictive Control for Hot Strip Mill Cooling System
    Hashimoto, Tomoaki
    Yoshioka, Yusuke
    Ohtsuka, Toshiyuki
    2010 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, 2010, : 646 - 651
  • [5] PROFILE AND SHAPE CONTROL TECHNOLOGY FOR HOT STRIP MILL.
    Yazawa, S.
    Hirase, K.
    Ono, T.
    Miyatake, M.
    SEAISI Quarterly (South East Asia Iron and Steel Institute), 1984, 13 (02): : 58 - 73
  • [6] Control of mass flow in a hot strip mill using model predictive control
    Schuurmans, J
    Jones, T
    PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 & 2, 2002, : 379 - 384
  • [7] Application of efficient nonlinear predictive control to a hot strip finishing mill
    Bulut, B
    Ordys, AW
    Grimble, MJ
    PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 & 2, 2002, : 373 - 378
  • [8] Hot strip mill thickness and profile measurement
    Mitchell, J.F.
    Quinn, K.S.
    AISE Steel Technology, 2001, 78 (06): : 35 - 37
  • [9] Evolution of transversal thermal profile on hot strip mill
    Collent-Fenetrier, J.M.
    Gevers, P.
    de Lamberterie, B.
    Blanchet, F.
    Caut, P.
    Ironmaking and Steelmaking, 1996, 23 (01): : 82 - 83
  • [10] Evolution of transversal thermal profile on hot strip mill
    ColletFenetrier, JM
    Gevers, P
    deLamberterie, B
    Blanchet, F
    Caut, P
    IRONMAKING & STEELMAKING, 1996, 23 (01) : 82 - 83
12345