Case study of product defects found by air discharge mode ESD but missed by contact ESD

被引：2
|
作者：
Soohoo, Kwok [1 ]
Wielgos, Michael [1 ]
机构：
[1] IBM Corp, Poughkeepsie, NY 12602 USA
来源：
2008 ASIA-PACIFIC SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND 19TH INTERNATIONAL ZURICH SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, VOLS 1 AND 2 | 2008年
关键词：
D O I：
10.1109/APEMC.2008.4559830
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Product ESD immunity testing to meet European EMC Directive called for air discharge and contact mode ESD tests; however when testing product with exposed metal areas then contact mode is the specified method. In this paper 2 cases are documented to demonstrate that air discharge mode used exclusively on product with plastic or insulated covers/chassis should not be taken a backseat to contact ESD for exposed metal areas. In fact both methods should be used to complement each other when testing products.
引用
收藏
页码：136 / 139
页数：4
相关论文
共 50 条
  • [1] Alternative Testing Method applicable to Air Discharge and Contact Discharge via Fixed Gap from ESD Generator in Contact Discharge Mode
    Ishida, Takeshi
    Tozawa, Yukihiro
    Fujiwara, Osamu
    IEEJ Transactions on Fundamentals and Materials, 2022, 142 (03): : 122 - 123
  • [2] An Alternative Air Discharge Test in Contact Discharge of ESD Generator Through Fixed Gap
    Ishida, Takeshi
    Xiao, Fengchao
    Kami, Yoshio
    Fujiwara, Osamu
    Nitta, Shuich
    2016 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2016, : 46 - 50
  • [3] The Influence of Discharge Voltage on ESD Parameters for Air Discharge
    Yuan Qingyun
    Liu Shanghe
    Zhang Xijun
    Xiao Zhiwei
    CEEM: 2009 5TH ASIA-PACIFIC CONFERENCE ON ENVIRONMENTAL ELECTROMAGNETICS, 2009, : 105 - 109
  • [4] Investigations into Methods to Stabilize the Spark in Air Discharge ESD
    Zhou, Jianchi
    Zhou, Keyu
    Yan, Xin
    Shen, Li
    Pommerenke, David
    Luo, Guang-xiao
    2019 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, SIGNAL AND POWER INTEGRITY (EMC+SIPI), 2019, : 147 - 151
  • [5] Step-Response-Based Calibration Method for ESD Generators in the Air-Discharge Mode
    Yang, Sen
    Bhandare, Aniket
    Rezaei, Hossein
    Huang, Wei
    Pommerenke, David J.
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2018, 60 (05) : 1598 - 1601
  • [6] Study and Modeling of Electrostatic Discharge (ESD) Simulator
    Kumar, Jitendra
    Nagesh, S. K.
    Mishra, Puneet Kumar
    Ghatpande, Nitin D.
    Dhanabalan, T. L.
    INCEMIC 2008: 10TH INTERNATIONAL CONFERENCE ON ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY, PROCEEDINGS, 2008, : 199 - 204
  • [7] Study of the ESD defects impact on ICs reliability
    Essely, F
    Bestory, C
    Guitard, N
    Bafleur, A
    Wislez, A
    Doche, E
    Perdu, P
    Touboul, A
    Lewis, D
    MICROELECTRONICS RELIABILITY, 2004, 44 (9-11) : 1811 - 1815
  • [8] Rise time limit of discharge current for air discharge of an ESD-gun
    Mori, Ikuko
    Fujiwara, Osamu
    Ishigami, Shinobu
    CEEM' 2006: ASIA-PACIFIC CONFERENCE ON ENVIRONMENTAL ELECTROMAGNETICS, VOLS 1 AND 2, PROCEEDINGS, 2006, : 34 - +
  • [9] Calculation of magnetic near field generated by the contact discharge of an ESD gun
    Fujiwara, O
    Mori, I
    Ishigami, S
    Yamanaka, Y
    ELECTRICAL ENGINEERING IN JAPAN, 2005, 153 (01) : 17 - 24
  • [10] Study of ESD quench effects by air ionization
    Honda, M
    Murakami, T
    Tonoya, Y
    ELECTRICAL OVERSTRESS/ELECTROSTATIC DISCHARGE SYMPOSIUM PROCEEDINGS, 1996, 1996, : 327 - 332
12345