Effect of microstructure on the surface finish during machining of V-microalloyed steel: Comparison between ferrite-bainite-martensite and ferrite-pearlite microstructures

被引：2
|
作者：
Sivaraman, V. [1 ]
Vijayaraghavan, L. [1 ]
Sankaran, S. [2 ]
机构：
[1] Indian Inst Technol Madras, Dept Mech Engn, Madras 600036, Tamil Nadu, India
[2] Indian Inst Technol Madras, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2015年 / 229卷 / 08期
关键词：
Multiphase steel; surface roughness; CUTTING PARAMETERS; ROUGHNESS; FORCE;
D O I：
10.1177/0954405414535922
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Multiphase ferrite-bainite-martensite microalloyed steel produced through a two-step cooling followed by annealing route and a ferrite-pearlite steel obtained through air-cooling after forging were subjected to turning operation. The influence of process parameters such as cutting speed, feed and depth of cut on surface roughness on both materials was compared. The results show that the multiphase microalloyed steel exhibited high surface finish than air-cooled steel. The analysis of variance shows that the contribution of cutting speed and depth of cut on surface roughness are insignificant for both ferrite-bainite-martensite and ferrite-pearlite microstructures.
引用
收藏
页码：1463 / 1466
页数：4
相关论文
共 15 条
  • [1] Effect of cutting parameters on cutting force and surface roughness during machining microalloyed steel: Comparison between ferrite-pearlite, tempered martensite and ferrite-bainite-martensite microstructures
    Sivaraman, V.
    Sankaran, S.
    Vijayaraghavan, L.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (01) : 141 - 150
  • [2] High cycle fatigue behaviour of a multiphase microalloyed medium carbon steel: a comparison between ferrite-pearlite and tempered martensite microstructures
    Sankaran, S
    Sarma, VS
    Padmanabhan, KA
    Jaeger, G
    Koethe, A
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 362 (1-2): : 249 - 256
  • [3] EFFECT OF MICROSTRUCTURE ON MECHANICAL PROPERTY OF FERRITE-BAINITE-MARTENSITE TRI-PHASE STEEL
    HASHIMOTO, S
    MIMURA, K
    HOSODA, T
    SUDO, M
    JOURNAL OF METALS, 1987, 39 (07): : A46 - A46
  • [4] FURTHER INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL-BEHAVIOR OF ANTIGRANULOCYTES BAINITE IN A HIGH-STRENGTH, LOW-ALLOY STEEL - COMPARISON OF FERRITE-PEARLITE AND FERRITE-MARTENSITE MICROSTRUCTURES
    SAMUEL, FH
    DANIEL, D
    SUDRE, O
    MATERIALS SCIENCE AND ENGINEERING, 1987, 92 : 43 - 62
  • [5] Effect of microstructures on the fatigue behavior of V-added ferrite-pearlite type microalloyed steels
    Yaguchi, Hiroshi
    Tsuchida, Takehiro
    Matsushima, Yoshitake
    Abe, Satoshi
    Iwasaki, Katsuhiro
    Inada, Atsushi
    KOBELCO Technology Review, 2002, (25): : 49 - 53
  • [6] Effect of microstructures on the fatigue behavior of V-added ferrite-pearlite type microalloyed steels
    R and D: Research and Development Kobe Steel Engineering Reports, 2000, 50 (01): : 53 - 56
  • [7] Low cycle fatigue behavior of a multiphase microalloyed medium carbon steel: comparison between ferrite-pearlite and quenched and tempered microstructures
    Sankaran, S
    Sarma, VS
    Padmanabhan, KA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 345 (1-2): : 328 - 335
  • [8] Effect of microstructure on the impact toughness of Nb-microalloyed steel: Generalisation of existing relations from ferrite-pearlite to high strength microstructures
    Gutierrez, I.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 571 : 57 - 67
  • [9] Fatigue crack growth behaviors in hot-rolled low carbon steels: A comparison between ferrite-pearlite and ferrite-bainite microstructures
    Guan, Mingfei
    Yu, Hao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 875 - 881
  • [10] Microstructure Stability of V and Ta Microalloyed 12%Cr Reduced Activation Ferrite/Martensite Steel during Long-term Aging at 650℃
    Xiang Xiao
    Guoquan Liu
    Benfu Hu
    Jinsan Wang
    Wenbin Ma
    JournalofMaterialsScience&Technology, 2015, 31 (03) : 311 - 319
12