Morphology, composition, and structure of carbon deposits from diesel and biomass oil/diesel blends on a pintle-type fuel injector nozzle

被引：12
|
作者：
Wo, Hengzhou [1 ]
Dearn, Karl D. [2 ]
Song, Ruhong [1 ]
Hu, Enzhu [1 ]
Xu, Yufu [1 ]
Hu, Xianguo [1 ]
机构：
[1] Hefei Univ Technol, Sch Mech & Automot Engn, Hefei 230009, Peoples R China
[2] Univ Birmingham, Sch Mech Engn, Birmingham B15 2TT, W Midlands, England
来源：
TRIBOLOGY INTERNATIONAL | 2015年 / 91卷
基金：
中国国家自然科学基金; 中国博士后科学基金;
关键词：
Biomass-oil; Diesel; Carbon deposit; Nozzle; SOOT; OIL; BIODIESEL; SPECTROSCOPY; CHEMISTRY;
D O I：
10.1016/j.triboint.2015.07.003
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A biomass oil/diesel blend was prepared using an emulsion method and combusted in a diesel engine. An injector was then removed and the morphology, composition, and structure of the carbonaceous deposits on the pintle-type nozzle were characterized using a combination of HRTEM, SEM/EDAX, Raman and XRD. Results showed that the carbon deposition of the emulsified fuel with high crystallinity was greater than that of diesel. The agglomerated particulate diameters of the deposited carbon from diesel and emulsified fuel were approximately 10-30 mu m and 50 mu m, respectively. The carbon deposition mechanism from the emulsified fuel was attributed to the high oxygen content of the groups leading to increased polymerization and subsequent condensation on the nozzle surfaces that was then carbonised. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：189 / 196
页数：8
相关论文
共 47 条
  • [1] Characteristics of Injector Nozzle Carbon Deposits in Diesel Engine
    Zhao W.
    Wang X.
    Huang Y.
    Zhang Z.
    Li B.
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2019, 37 (06): : 541 - 545
  • [2] Mathematical model for predicting initial trajectory of diesel fuel spray from pintle nozzle
    Zhang, Yusheng
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 1994, 12 (02):
  • [3] Analysis of diesel engine injector nozzle spray characteristics fueled with residual fuel oil
    Achebe, C. H.
    Ogunedo, B. M. O.
    Chukwuneke, J. L.
    Anosike, N. B.
    HELIYON, 2020, 6 (08)
  • [4] Performance enhancement of diesel engine using Karanja oil methyl ester as a fuel blend with diesel by variable injector nozzle hole
    Singh, Vishnu
    Gupta, Santosh Kumar
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (02):
  • [5] Fuel Properties and Emissions from a Diesel Power Generator Fuelled with Jatropha Oil and Diesel Fuel Blends
    Chung, Tsair-Wang
    Liu, Kuan-Ting
    Gao, Shun
    RENEWABLE AND SUSTAINABLE ENERGY, PTS 1-7, 2012, 347-353 : 2688 - 2691
  • [6] Effects of Injector Nozzle Number of Holes and Fuel Injection Pressures on the Diesel Engine Characteristics Operated with Waste Cooking Oil Biodiesel Blends
    Ahmed, Mukur Beyan
    Mekonen, Menelik Walle
    FUELS, 2022, 3 (02): : 275 - 294
  • [7] Impact of oil aging and composition on the morphology and structure of diesel soot
    Ferraro, Giovanni
    Fratini, Emiliano
    Rausa, Riccardo
    Baglioni, Piero
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2018, 512 : 291 - 299
  • [8] Performance of diesel engine running on diesel fuel and its blends with refined biomass fast pyrolysis bio-oil
    20151900832233
    Xu, Cang-Su (xcs0929@163.com), 2015, Zhejiang University (49):
  • [9] Transient development and structure of supersonic gas jets from narrow-cone-angle pintle-type hydrogen injector
    Bae, Gyuhan
    Lee, Jaehyun
    Moon, Seoksu
    FUEL, 2025, 384
  • [10] Thermal analysis of cylinder head carbon deposits from single cylinder diesel engine fueled by palm oil-diesel fuel emulsions
    Husnawan, M.
    Masjuki, H. H.
    Mahlia, T. M. I.
    Saifullah, M. G.
    APPLIED ENERGY, 2009, 86 (10) : 2107 - 2113
12345