A 5.1% efficient kesterite Cu2ZnSnS4 (CZTS) thin film solar cell prepared using modified sulfurization process

被引：37

作者：

Gang, Myeng G. ^{[1
]}

Gurav, Kishor V. ^{[1
]}

Shin, Seung W. ^{[2
]}

Hong, Chang W. ^{[1
]}

Min, Jung H. ^{[3
]}

Suryawanshi, Mahesh P. ^{[1
]}

Vanalakar, Sharad A. ^{[1
]}

Lee, Dong S. ^{[3
]}

Kim, Jin H. ^{[1
]}

机构：

[1] Chonnam Natl Univ, Dept Mat Sci & Engn, Optoelect Convergence Res Ctr, Kwangju 500757, South Korea

[2] Inst for Basic Sci Korea, Ctr Nanomat & Chem React, Taejon 305701, South Korea

[3] GIST, Dept Mat Sci & Engn, Gwangju, South Korea

来源：

PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 12, NO 6 | 2015年 / 12卷 / 06期

关键词：

Cu2ZnSnS4 (CZTS); sputtering; rapid thermal annealing (RTA); thin film solar cells (TFSCs); PRECURSOR SULFUR-CONTENT; FABRICATION;

D O I：

10.1002/pssc.201400285

中图分类号：

O469 [凝聚态物理学];

学科分类号：

070205 ;

摘要：

Cu2ZnSnS4 (CZTS) absorber thin films are prepared by sulfurization of sputtered Cu/Sn/Zn (CZT) stacked metallic precursor. The modified sulfurization process is adapted to prepare photovoltaic quality CZTS films. Specifically, sputtered CZT precursor films are sulfurized in sulfur powder contained graphite box using rapid thermal processing furnace at 580 degrees C for 10 min, in N-2 (95%) + H2S (5%) atmosphere. The Cu-poor CZTS films with various Cu/(Zn+Sn) ratio are prepared by varying Cu layer deposition time. The effect of Cu/(Zn+Sn) ratio on the properties of CZTS films is investigated. The CZTS thin film solar cells with Cu/(Zn+Sn)=0.76 shows best conversion efficiency of 5.1% (V-oc: 573 mV, J(sc): 18.38 mA/cm(2), FF: 0.48 %, and active area: 0.31 cm(2)). (C) 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

引用

页码：713 / 716

页数：4

共 50 条

[1] Phase evolution of Cu2ZnSnS4 (CZTS) kesterite thin films during the sulfurization process
Jung, Hyo Rim
Shin, Seung Wook
Gurav, K. V.
Suryawanshi, M. P.
Hong, Chang Woo
Yang, Han Seung
Lee, Jeong Yong
Moon, Jong Ha
Kim, Jin Hyeok
CERAMICS INTERNATIONAL, 2015, 41 (10) : 13006 - 13011
[2] Improvement of Cu2ZnSnS4 thin film properties by a modified sulfurization process
Seo, Dongwan
Na, Jihoon
Kim, Changheon
Jeong, Chaehwan
Lim, Sangwoo
THIN SOLID FILMS, 2015, 591 : 289 - 294
[3] Research progress on absorber layers of Cu2ZnSnS4 (CZTS) thin film solar cell prepared by electrodeposition
Han G.
Lu J.
Wang M.
Li D.
Cailiao Daobao/Materials Review, 2016, 30 (06): : 50 - 56
[4] Growth of Cu2ZnSnS4 (CZTS) thin films using short sulfurization periods
Olgar, M. A.
Tomakin, M.
Kucukomeroglu, T.
Bacaksiz, E.
MATERIALS RESEARCH EXPRESS, 2019, 6 (05)
[5] Deposition of Kesterite Cu2ZnSnS4 (CZTS) Thin Films by Spin Coating Technique for Solar Cell Application
Swami, Sanjay Kumar
Kumar, Anuj
Dutta, Viresh
PV ASIA PACIFIC CONFERENCE 2012, 2013, 33 : 198 - 202
[6] Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS4
Chen, Shiyou
Gong, X. G.
Walsh, Aron
Wei, Su-Huai
APPLIED PHYSICS LETTERS, 2010, 96 (02)
[7] SULFURIZATION STUDIES OF THE POTENTIAL THIN FILM SOLAR ABSORBER CU2ZnSnS4
Cheng, An-Jen
Manno, Mike
Frakie, Rachel
Hoffman, Rachel
Leighton, Chris
Aydil, Eray
Campbell, Stephen A.
35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010,
[8] Chemical Spray Pyrolyzed Kesterite Cu2ZnSnS4 (CZTS) Thin Films
Khalate, S. A.
Kate, R. S.
Deokate, R. J.
62ND DAE SOLID STATE PHYSICS SYMPOSIUM, 2018, 1942
[9] Effect of periodic precursor on sulfurization process of Cu2ZnSnS4 thin film
Huang, Xiaomeng
Lin, Junhui
Xu, Jiaxiong
Liu, Yaqun
Yang, Yuanzheng
Xie, Zhiwei
Cai, Weitong
CERAMICS INTERNATIONAL, 2018, 44 (17) : 20877 - 20882
[10] Influence of sulfurization pressure on structural and electrical property of Cu2ZnSnS4 thin film and solar cell
Li, Jinze
Shen, Honglie
Li, Yufang
Yao, Hanyu
Wang, Wei
Wu, Wenwen
Ren, Zheng
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2016, 27 (08) : 8688 - 8692

← 1 2 3 4 5 →