Die-bonding performance and mechanism based on the sintering of micro Ag paste for high power devices

被引：0

作者：

Takemasa, Tetsu ^{[1
]}

Ueshima, Minoru ^{[1
]}

Jiu, Jinting ^{[1
]}

Suganuma, Katsuaki ^{[2
]}

机构：

[1] Senju Met Ind Co Ltd, Adachi Ku, Senju Hashido Cho 23, Tokyo 1208555, Japan

[2] Osaka Univ, Inst Sci & Ind Res, Osaka 5670047, Japan

来源：

2016 IEEE 16TH INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO) | 2016年

关键词：

silver paste; loading pressure; contact; bonding pressure; shear strength; INTERMETALLIC COMPOUNDS GROWTH; INTERFACIAL REACTION; TEMPERATURE; SOLDER; SN;

D O I：

暂无

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Commercially available micron-sized Ag flake particles and submicron-sized Ag particles were used to make Ag paste. The Ag paste was used to connect Si dies to Ni-Ag plated Cu substrates to achieve die-bonding joint for high temperature application. The contact between die and Ag paste was affected by the loading pressure, and was realized with only 0.2 MPa pressure. And the shear strength depended on the bonding pressure and increased over 20 MPa with only 0.2 MPa pressure. The high shear strength achieved at low bonding pressure contributed to the tight contact between die and paste, and optimized bonding pressure.

引用

页码：377 / 380

页数：4

共 50 条

[1] Copper Die-Bonding Sinter Paste: Sintering and Bonding Properties
Ishikawa, Dai
Nakako, Hideo
Kawana, Yuki
Sugama, Chie
Negishi, Motohiro
Ejiri, Yoshinori
Ueda, Suguru
Bao Ngoc An
Wurst, Helge
Leyrer, Benjamin
Blank, Thomas
Weber, Marc
2018 7TH ELECTRONIC SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE (ESTC), 2018,
[2] Sintering of Ag paste for power devices die attach on Cu surfaces
Manikam, Vemal Raja
Tolentino, Erik Nino
2014 IEEE 16TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2014, : 94 - 98
[3] DIE ATTACHMENT MATERIAL BASED ON MICRO AG PASTE FOR THE APPLICATION OF HIGH POWDER DEVICES
Jiu, Jinting
Takemasa, Tetsu
Seino, Junko
Tachibana, Yoshie
2019 CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE (CSTIC), 2019,
[4] Bonding and High-Temperature Storage Performance of Die Attachment with Ag Paste Sintering on Bare Direct Bonding Aluminum (DBA) Substrate
Zhang, Zheng
Chen, Chuangtong
Kim, Dongjin
Suetake, Aiji
Nagao, Shijo
Suganuma, Katsuaki
TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 697 - 706
[5] Reconstruction and thermal performance analysis of die-bonding filling states for high-power light-emitting diode devices
Li, Zongtao
Tang, Yong
Ding, Xinrui
Li, Cheng
Yuan, Dong
Lu, Yifan
APPLIED THERMAL ENGINEERING, 2014, 65 (1-2) : 236 - 245
[6] Study on die-bonding of single emitter high power laser diodes
Yue, Yuxin
Wang, Bin
Wang, Xiantao
Wang, Yong
Xu, Peidong
Ma, Changyu
Sheng, Xiting
OPTICAL ENGINEERING, 2022, 61 (03)
[7] Nano-Cu Sintering Paste for High Power Devices Die Attach Applications
Zhao, Jinjin
Yao, Min
Lee, Ning-Cheng
2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1693 - 1699
[8] Nano-Cu Sintering Paste for High Power Devices Die Attach Applications
Zhao, Jinjin
Yao, Min
Lee, Ning-Cheng
2018 IEEE 68TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2018), 2018, : 557 - 563
[9] Nano-Cu Sintering Paste for High Power Devices Die Attach Applications
Zhao, Jinjin
Yao, Min
Lee, Ning-Cheng
2017 12TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2017, : 70 - 76
[10] Solvent effect on pressureless and low-temperature sintering of Ag paste for die-attachment in high-power devices
Zhang, Hao
Chen, Chuantong
Jiu, Jinting
Suganuma, Katsuaki
2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 624 - 627

← 1 2 3 4 5 →