Hot deformation behavior of the 30%Mo/Cu-Al2O3 composite prepared by vacuum hot-pressed sintering

被引:0
|
作者
Liu, Yong [1 ]
Sun, Yongwei [1 ]
Tian, Baohong [1 ]
Feng, Jiang [1 ]
Zhang, Yi [1 ]
机构
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China
来源
关键词
30%Mo/Cu-Al2O3 composite; hot deformation; flow stress; constitutive equation;
D O I
10.4028/www.scientific.net/AMM.117-119.893
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Hot deformation behavior of the 30%Mo/Cu-Al2O3 composite was investigated by hot compression tests on Gleeble-1500D thermal simulator in the temperature ranges of 450 similar to 750 degrees C and the strain rate ranges of 0.01 similar to 5s(-1), as the total strain is 0.7. The results show that the peak stress increases with the decreased deformation temperature or the increased strain rate. Based on the true stress-strain curves, the established constitutive equation represents the high-temperature flow behavior of the composite, and the calculated flow stresses are in good agreement with the high-temperature deformation experimental results.
引用
收藏
页码:893 / 896
页数:4
相关论文
共 50 条
  • [1] Hot compression performance of TiC10/Cu-Al2O3 composite prepared by vacuum hot-pressed sintering
    Yang, Zhiqiang
    Liu, Yong
    Tian, Baohong
    Zhang, Yi
    ADVANCED ENGINEERING MATERIALS III, PTS 1-3, 2013, 750-752 : 99 - 102
  • [2] Strengthening mechanism and hot deformation behavior of 20%Mo/Cu-Al2O3 composite
    Liu, Yong
    Sun, Yong-Wei
    Tian, Bao-Hong
    Feng, Jiang
    Zhang, Yi
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2013, 23 (03): : 750 - 755
  • [3] Compression deformation behavior of 30%Mo/Cu-Al2O3 composite at elevated temperature
    Sun, Yong-Wei
    Liu, Yong
    Tian, Bao-Hong
    Feng, Jiang
    Zhang, Yi
    Gongneng Cailiao/Journal of Functional Materials, 2012, 43 (01): : 99 - 102
  • [4] Effect of sintering atmosphere on the microstructure of hot-pressed Al2O3/Cu nanocomposites
    Oh, ST
    Kang, KM
    DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 1217 - 1220
  • [5] Investigating the deformation behavior of hot-pressed Ti/Al/Ti laminated composite
    Assari, Amir Hossein
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 95 : 369 - 381
  • [6] Study on Thermal Deformation Behavior and Properties of Vacuum Hot-press Sintered W(50)/Cu-Al2O3 Composite
    Zhang Xiaowei1
    2Henan Key Laboratory of Advanced Non-ferrous Metals
    稀有金属材料与工程, 2011, 40 (S3) : 253 - 255
  • [7] Study on Thermal Deformation Behavior and Properties of Vacuum Hot-press Sintered W(50)/Cu-Al2O3 Composite
    Zhang Xiaowei
    Tian Baohong
    Zhao Ruilong
    Zhang Yi
    Ren Fengzhang
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 253 - 255
  • [8] Tribological behavior of 30%Mo/Cu-Al2O3 composite with electric currents
    School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China
    不详
    Liu, Y. (liuyong@mail.haust.edu.cn), 1600, Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China (34):
  • [9] SWELLING OF HOT-PRESSED AL2O3
    BENNISON, SJ
    HARMER, MP
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1985, 68 (11) : 591 - 597
  • [10] CHEMICAL REACTION IN A HOT-PRESSED AL2O3-GLASS COMPOSITE
    STETT, MA
    FULRATH, RM
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1967, 50 (12) : 673 - &