Production of synthesis gas through plasma-assisted reforming of greenhouse gases

被引:10
|
作者
Kogelschatz, U [1 ]
Zhou, LM [1 ]
Xue, B [1 ]
Eliasson, B [1 ]
机构
[1] ABB Corp Res Ltd, CH-5405 Baden, Switzerland
关键词
D O I
10.1016/B978-008043018-8/50062-X
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Low temperature conversion of the two major greenhouse gases CO2 and CH4 to synthesis gas (a mixture of H-2 and CO) is investigated theoretically and experimentally in a high power dielectric-barrier discharge (DBD). Utilising this nonequilibrium discharge technique high conversion rates can be achieved in this special gas mixture. A pronounced synergetic effect caused by free radical reactions was observed using these two gases simultaneously. This way CO2 separated from flue gases could be combined with methane to produce syngas which then can be processed to yield liquid fuels like e.g. methanol or dimethyl ether. Parameters studied are CH4/CO2 mixing ratio (0 - 100% of CO2), electric power(100 - 800 W), flow rate (0.1 - 4 Nl/min), gas pressure (0.35 - 2 bar) and reactor wall temperature (80 degrees C 250 degrees C). This technique of plasma reforming of methane with carbon dioxide can produce syngas with different H-2/CO ratios depending mainly on the CH4/CO2 mixing ratio. The amount of syngas produced rises almost linearly with increasing discharge power. Up to 66 moles of syngas with a H-2/CO ratio of 3.7 were obtained from 100 moles of feed gas in a single pass through the DBD reactor of 31 cm active length. The minimum required specific energy was 40 eV/molecule for the production of syngas (H-2 plus CO) and the highest energy efficiency (electric energy converted to chemical energy in the syngas) reached so far was about 7%.
引用
收藏
页码:385 / 390
页数:4
相关论文
共 50 条
  • [1] Nonequilibrium plasma reforming of greenhouse gases to synthesis gas
    Zhou, LM
    Xue, B
    Kogelschatz, U
    Eliasson, B
    ENERGY & FUELS, 1998, 12 (06) : 1191 - 1199
  • [2] Hydrogen-rich gas production from propane using plasma-assisted reforming
    Chun, Young Nam
    Kim, Sun Il
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2006, 12 (04) : 552 - 557
  • [3] Plasma-Assisted Reforming of Methane
    Feng, Jiayu
    Sun, Xin
    Li, Zhao
    Hao, Xingguang
    Fan, Maohong
    Ning, Ping
    Li, Kai
    ADVANCED SCIENCE, 2022, 9 (34)
  • [4] Plasma-Assisted Reforming of Natural Gas for GTL-Part I
    Serbin, Serhiy Ivanovich
    Matveev, Igor B.
    Goncharova, Nataliia A.
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2014, 42 (12) : 3896 - 3900
  • [5] Plasma assisted decomposition and reforming of greenhouse gases: A review of current status and emerging trends
    Vadikkeettil, Yugesh
    Subramaniam, Yugeswaran
    Murugan, Ramaswamy
    Ananthapadmanabhan, P., V
    Mostaghimi, Javad
    Pershin, Larry
    Batiot-Dupeyrat, Catherine
    Kobayashi, Yasukazu
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2022, 161
  • [6] Plasma reforming of glycerol for synthesis gas production
    Zhu, Xinli
    Hoang, Trung
    Lobban, Lance L.
    Mallinson, Richard G.
    CHEMICAL COMMUNICATIONS, 2009, (20) : 2908 - 2910
  • [7] COMBUSTION SYNTHESIS CATALYSTS FOR REFORMING GREENHOUSE GASES
    Karanasios, K.
    Xanthopoulou, G.
    Vekinis, G.
    Zoumpoulakis, L.
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2013,
  • [8] Hydrogen-rich syngas generation through microwave plasma reforming of greenhouse gases
    Akande, Olugbenga
    Lee, Bongju
    Okolie, Jude A.
    Museba, Hugues Nkomba
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (89) : 34649 - 34658
  • [9] Plasma-Assisted Reforming of Natural Gas for GTL: Part III-Gas Turbine Integrated GTL
    Matveev, Igor B.
    Washchilenko, Nikolay V.
    Serbin, Serhiy I.
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2015, 43 (12) : 3969 - 3973
  • [10] Kinetic Mechanism of Reactive Oxygen/Nitrogen Species in Plasma-Assisted Greenhouse Gas Replacement
    Lee, Seonbyul
    An, Surin
    Kim, Yejin
    Hong, Sang Jeen
    SCIENCE OF ADVANCED MATERIALS, 2021, 13 (11) : 2227 - 2233