Fast firing of electroceramics

被引：6
|
作者：
Bowen, CR [1 ]
Open, J [1 ]
Fitzmaurice, J [1 ]
Mahon, S [1 ]
机构：
[1] DERA, Mech Sci Sector, Farnborough GU14 0LX, Hants, England
来源：
FERROELECTRICS | 1999年 / 228卷 / 1-4期
关键词：
fast-fire; piezoelectric; grain size;
D O I：
10.1080/00150199908226133
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fast firing of electroceramic material was investigated as a means of rapidly processing piezoelectric material. The green bodies were rapidly heated to their sintering temperature and sintered for a variety of processing times. Piezoelectric properties and microstructures were compared to material processed under the conventional processing conditions. The d(33) coefficient coupling factor and density compared well with conventional material whilst the grain size was considerably lower. Possible improvements due to the fine grain size are increased mechanical properties and lower dielectric loss.
引用
收藏
页码：159 / 166
页数：8
相关论文
共 50 条
  • [1] Fast firing of electroceramics
    DERA, Mechanical Sciences Sector, Ively Road, Farnborough, GU14 OLX, United Kingdom
    Ferroelectrics, 1 (159-166):
  • [2] Permeability of the electroceramics to gas and its dependence on the firing temperature
    Stubna, I
    Kozik, T
    CERAMICS INTERNATIONAL, 1997, 23 (03) : 247 - 249
  • [3] THE ECONOMICS OF FAST FIRING VS CONVENTIONAL FIRING
    HARMAN, CG
    AMERICAN CERAMIC SOCIETY BULLETIN, 1982, 61 (08): : 828 - 828
  • [4] FAST FIRING BODIES
    ROBINSON, GC
    PREGNALL, RA
    VIDETTO, RB
    AMERICAN CERAMIC SOCIETY BULLETIN, 1968, 47 (04): : 431 - &
  • [5] The key to fast firing
    不详
    CFI-CERAMIC FORUM INTERNATIONAL, 1997, 74 (11-12): : 661 - 661
  • [6] FAST FIRING OF ALUMINA
    GARCIA, DE
    SEIDEL, J
    JANSSEN, R
    CLAUSSEN, N
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1995, 15 (10) : 935 - 938
  • [7] FAST FIRING OF SANITARYWARE
    GORNALL, HA
    AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (04): : 447 - &
  • [8] Fast firing and cost effectiveness
    Riedel, Rudolf
    ZI, Ziegelindustrie International/Brick and Tile Industry International, 1999, (04): : 33 - 44
  • [9] FAST FIRING OF DIELECTRIC MATERIALS
    FOX, BH
    DAYTON, GO
    BIGGERS, JV
    AMERICAN CERAMIC SOCIETY BULLETIN, 1984, 63 (08): : 1009 - 1009
  • [10] Fast firing for ceramic processing
    Metallurgia, 63 (10):
12345