The Emission Characteristics of a CI Engine Fueled with a Biofuel Blend

被引:8
|
作者
Ilkilic, C. [1 ]
机构
[1] Firat Univ, Tech Educ Fac, TR-23119 Elazig, Turkey
关键词
alternative fuels; biofuel; cottonseed oil methyl ester; diesel fuel; emissions; COTTON SEED OIL; DIESEL-ENGINE; VEGETABLE-OILS; BIODIESEL PRODUCTION; EXHAUST EMISSIONS; RAPESEED OIL; PERFORMANCE; TRANSESTERIFICATION; ESTERS; METHYL;
D O I
10.1080/15567031003773270
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this study, an alternative diesel fuel, of which chemical modification was made by transesterification with short chain methyl alcohols, was produced from cottonseed oil. The modified products were then evaluated according to their fuel chemical properties as compared to diesel fuel. The purpose of this study is to investigate the emission characteristics of the fuel blend of 75% cottonseed oil methyl ester with 25% diesel fuel in a single cylinder unmodified diesel engine. The effects of biofuel and diesel fuel blend on a direct injected, four strokes, and single cylinder diesel engine exhaust emissions were studied. The results showed on the emissions of the engine that there was about 36% reduction in CO, about 18% reduction in CO2, and about 15% reduction in NOx. These results show that B75 fuel has better emission characteristics than diesel fuel. The reduction exhaust emissions made B75 a suitable alternative fuel for diesel engines and could help in controlling air pollution.
引用
收藏
页码:1901 / 1912
页数:12
相关论文
共 50 条
  • [1] Performance and emissions characteristics of biofuel blend in a CI engine
    Ilkilic, Cumali
    ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH, 2011, 28 (01): : 369 - 378
  • [2] Combustion and Emission Characteristics of CI Engine fueled with Rapeseed Biodiesel, Diesel and Ethanol Blend
    Chen, Hao
    Yang, Lu
    Li, Yapeng
    Ma, Yong
    Zhang, Penghui
    Li, Jiang
    INTERNATIONAL ENERGY JOURNAL, 2014, 14 (02): : 75 - 86
  • [3] Performance and emission analysis of a CI engine fueled with parsley biodiesel–diesel blend
    Sarah Oluwabunmi Bitire
    Tien-Chien Jen
    Materials for Renewable and Sustainable Energy, 2022, 11 : 143 - 153
  • [4] Effect of the second generation and third generation biofuel blend on performance, emission and combustion characteristics of CI engine
    Boopathi, D.
    Thiyagarajan, S.
    Edwin Geo, V.
    Madhankumar, S.
    INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2020, 41 (07) : 767 - 774
  • [5] Performance and emission analysis of a CI engine fueled with parsley biodiesel-diesel blend
    Bitire, Sarah Oluwabunmi
    Jen, Tien-Chien
    MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY, 2022, 11 (02) : 143 - 153
  • [6] Numerical analysis of performance and emission behavior of CI engine fueled with microalgae biodiesel blend
    Rajak, Upendra
    Nashine, Prerana
    Dasore, Abhishek
    Balijepalli, Ramakrishna
    Chaurasiya, Prem Kumar
    Verma, Tikendra Nath
    MATERIALS TODAY-PROCEEDINGS, 2022, 49 : 301 - 306
  • [7] Performance and emission characteristics of a CI engine fueled with milk scum biodiesel
    Telgane, Veerbhadrappa
    Godiganur, Sharanappa
    Srikanth, H., V
    Patil, Sachinkumar
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 284 - 289
  • [8] Investigating Engine Performance and Emission Characteristics of a CI Engine Fueled with Waste Fried Oil Blend Containing Butanol, Alumina, and Silver Nanoparticles
    Mishra, Subham
    Sanghamitra, Sama
    Majji, Dhanush
    Abrar, Iyman
    Deshmukh, Sandip S.
    Dutta, Arnab
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2025, 50 (06) : 4037 - 4054
  • [9] Performance and exhaust emission characteristics of a CI engine fueled with synthesized fuel blends
    Abdulvahitoglu, Asli
    Aydin, Kadir
    ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH, 2012, 28 (02): : 699 - 710
  • [10] Emission analysis of CI engine fueled with S. Marginatum macro algae biofuel - diesel blends
    Karthikeyan, S.
    Periyasamy, M.
    Prathima, A.
    Sabariswaran, K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 3458 - 3463