The Electrophoretic Deposition of Lanthanum Manganite Powders for a Cathode-Supported Solid Oxide Fuel Cell in Planar and Tubular Configurations

被引：7
|
作者：
Krkljus, Ivana [1 ]
Brankovic, Zorica [1 ]
Duris, Katarina [1 ]
Vukotic, Vesna [1 ]
Brankovic, Goran [1 ]
Bernik, Slavko [2 ]
机构：
[1] Univ Belgrade, Ctr Multidisciplinary Studies, Belgrade 11030, Serbia
[2] Jozef Stefan Inst, Ljubljana 1000, Slovenia
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2008年 / 5卷 / 06期
关键词：
D O I：
10.1111/j.1744-7402.2008.02218.x
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The purpose of this research was to obtain porous, high-quality cathodes for solid oxide fuel cells in both planar and tubular shapes. To accomplish this, cathodic electrophoretic deposition of the LaMnO3 powder (synthesized by the modified sol-gel method proposed by Pechini) was performed. The optimal sintering temperatures were 1200 degrees C and 1300 degrees C for the tubular and planar configurations, respectively. Single-phase deposits with about 40% porosity were obtained in both configurations. The cathode quality was confirmed by depositing an electrolyte layer of YSZ. After the cosintering of both layers, an extremely dense electrolyte layer was obtained, and the cathode layer retained its high porosity.
引用
收藏
页码：548 / 556
页数：9
相关论文
共 50 条
  • [1] Fabrication and characterization of a cathode-supported tubular solid oxide fuel cell
    Zhao, Chunhua
    Liu, Renzhu
    Wang, Shaorong
    Wang, Zhenrong
    Qian, Jiqin
    Wen, Tinglian
    JOURNAL OF POWER SOURCES, 2009, 192 (02) : 552 - 555
  • [2] Mechanistic modelling of a cathode-supported tubular solid oxide fuel cell
    Suwanwarangkul, R
    Croiset, E
    Pritzker, MD
    Fowler, MW
    Douglas, PL
    Entchev, E
    JOURNAL OF POWER SOURCES, 2006, 154 (01) : 74 - 85
  • [3] Cathode-supported tubular solid oxide fuel cell technology: A critical review
    Huang, Kevin
    Singhal, Subhash C.
    JOURNAL OF POWER SOURCES, 2013, 237 : 84 - 97
  • [4] Cathode Polarizations of a Cathode-Supported Solid Oxide Fuel Cell
    Huang, Kevin
    Zampieri, Alessandro
    Ise, Martin
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2010, 157 (10) : B1471 - B1478
  • [5] A promising direct carbon fuel cell based on the cathode-supported tubular solid oxide fuel cell technology
    Zhou, J.
    Ye, X. F.
    Shao, L.
    Zhang, X. P.
    Qian, J. Q.
    Wang, S. R.
    ELECTROCHIMICA ACTA, 2012, 74 : 267 - 270
  • [6] Mechanistic model development and performance study of cathode-supported tubular solid oxide fuel cell
    Shi, Yixiang
    Li, Chen
    Cai, Ningsheng
    Huagong Xuebao/Journal of Chemical Industry and Engineering (China), 2007, 58 (03): : 722 - 727
  • [7] Optimization of the Interconnect Ribs for a Cathode-Supported Solid Oxide Fuel Cell
    Kong, Wei
    Gao, Xiang
    Liu, Shixue
    Su, Shichuan
    Chen, Daifen
    ENERGIES, 2014, 7 (01): : 295 - 313
  • [8] Improvement on the Microstructure and Electrochemical Performance of Cathode-supported Tubular Solid Oxide Fuel Cells
    Zhao, C. H.
    Liu, R. Z.
    Wang, S. R.
    Wen, T. L.
    SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 553 - 558
  • [9] Modelling of a cathode-supported tubular solid oxide fuel cell operating with biomass-derived synthesis gas
    Suwanwarangkul, R.
    Croiset, E.
    Pritzker, M. D.
    Fowler, M. W.
    Douglas, P. L.
    Entchev, E.
    JOURNAL OF POWER SOURCES, 2007, 166 (02) : 386 - 399
  • [10] Electrophoretic deposition of solid oxide fuel cell material powders
    Negishi, H
    Yanagishita, H
    Yokokawa, H
    ELECTROPHORETIC DEPOSITION: FUNDAMENTALS AND APPLICATIONS, PROCEEDINGS, 2002, 2002 (21): : 214 - 221
12345