Evaluation of process causes and influences of residual stress on gear distortion

被引：20
|
作者：
Husson, Remi [1 ]
Dantan, Jean-Yves [2 ]
Baudouin, Cyrille [2 ]
Silvani, Serge [1 ]
Scheer, Thomas [1 ]
Bigot, Regis [2 ]
机构：
[1] FRCTR B02280, Renault Powertrain Proc Engn Div, F-92500 Rueil Malmaison, France
[2] Arts & Metiers ParisTech Lab Concept Fabricat Com, F-57078 Metz 03, France
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2012年 / 61卷 / 01期
关键词：
Heat treatment; Deformation; Residual stress; HEAT-TREATMENT;
D O I：
10.1016/j.cirp.2012.03.106
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the automotive industry, heat treatment of components is implicitly related to distortion. This phenomenon is particularly obvious in the case of gears because of their typical and precise geometry. Even if distortion can be anticipated to an extent by experience, it remains complex to comprehend. This paper presents an approach to estimate the distortion based on the idea of a distortion potential taking into account not only geometry but also the manufacturing process history. Then the idea is developed through simulation and experiments including annealing to understand the impact of residual stress on gear distortion in an industrial case study. (C) 2012 CIRP.
引用
收藏
页码：551 / 554
页数：4
相关论文
共 50 条
  • [1] Evaluation of welding distortion and residual stress
    Kitamura, Takanori
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2015, 84 (05): : 403 - 404
  • [2] Welding process impact on residual stress and distortion
    Colegrove, P.
    Ikeagu, C.
    Thistlethwaite, A.
    Williams, S.
    Nagy, T.
    Suder, W.
    Steuwer, A.
    Pirling, T.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (08) : 717 - 725
  • [3] Gear distortion through internal stress from the hobbing process
    Kohlhoff T.
    Brinksmeier E.
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2011, 106 (7-8): : 515 - 521
  • [4] GEAR CASE DISTORTION CAUSES FAILURES
    VANLANINGHAM, FL
    HYDROCARBON PROCESSING, 1977, 56 (01): : 91 - 96
  • [5] WELD RESIDUAL STRESS AND DISTORTION BY CONSIDERING PROCESS MECHANICS
    Mochizuki, Masahito
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 509 - 513
  • [6] Case study: Controlling the distortion of a crown wheel (hypoid gear) this study looks at whether adding an annealing step to the heat treating process has an effect on residual stress and distortion on hypoid gear sets.
    Rao, Yathish
    Advanced Materials and Processes, 2021, 179 (08): : 46 - 49
  • [7] Analysis of residual stress of gear tooth root after shot peening process
    Zhen Ma
    Tianyu Chen
    Zai Wang
    Xuegang Xing
    Xiaodong Hou
    Chao Chang
    The International Journal of Advanced Manufacturing Technology, 2023, 125 : 2147 - 2160
  • [8] Analysis of residual stress of gear tooth root after shot peening process
    Ma, Zhen
    Chen, Tianyu
    Wang, Zai
    Xing, Xuegang
    Hou, Xiaodong
    Chang, Chao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (5-6): : 2147 - 2160
  • [9] A Study on the Effect of Gear Hobbing Process Parameters on the Residual Stress of the Tooth Root
    Wang, Yazhou
    Xu, Huike
    Shen, Hao
    Wang, Gang
    Wang, Zhen
    APPLIED SCIENCES-BASEL, 2024, 14 (02):
  • [10] Residual stress interaction on gear manufacturing
    Rego, Ronnie
    Loepenhaus, Christoph
    Gomes, Jefferson
    Klocke, Fritz
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 252 : 249 - 258
12345