Experimental-numerical evaluation of a new butterfly specimen for fracture characterisation of AHSS in a wide range of stress states

Results of an experimental-numerical evaluation of a new butterfly specimen for fracture characterisation of AHHS sheets in a wide range of stress states are presented. The test on the new butterfly specimen is performed in a uniaxial tensile machine and provides sufficient data for calibration of common fracture models. In the first part, results of a numerical specimen evaluation are presented, which was performed with a material model of a dual-phase steel DP600 taken from literature with plastic flow and fracture descriptions. In the second part, results of an experimental-numerical specimen evaluation are shown, which was conducted on another dual-phase steel DP600, which was available with a description of plastic flow only and whose fracture behaviour was characterised in the frame of this work. The overall performance of the new butterfly specimen at different load cases with regard to characterisation of the fracture behaviour of AHSS was investigated. The dependency of the fracture strain on the stress triaxiality and Lode angle as well as space resolution is quantified. A parametrised CrachFEM ductile shear fracture model and modified Mohr-Coloumb ductile shear fracture model are presented as a result of this quantification. The test procedure and results analysis are believed to contribute to current discussions on requirements to AHSS fracture characterisation.