Influence of functionalized carbon nanofibers on the single carbon fiber-epoxy matrix interface

被引：18
|
作者：
Schaefer, Joseph D. [1 ]
Guzman, Mauricio E. [1 ]
Lim, Chee-Sern [1 ]
Rodriguez, Alejandro J. [1 ]
Minaie, Bob [1 ]
机构：
[1] Wichita State Univ, Dept Mech Engn, Wichita, KS 67260 USA
来源：
COMPOSITES PART B-ENGINEERING | 2013年 / 55卷
基金：
美国国家航空航天局;
关键词：
Electrophoretic deposition; Carbon fiber; Nano-structures; Interface/interphase; Stress transfer; MICROCOMPOSITES; COMPOSITES; STRENGTH; REINFORCEMENT; STATISTICS; NANOTUBES;
D O I：
10.1016/j.compositesb.2013.05.051
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Amine-functionalized carbon nanofibers (A-CNFs) were deposited on the surface of individual sized carbon fibers using electrophoretic deposition (EPD), and the average interfacial shear strength (IFSS) was determined using the single fiber fragmentation test in conjunction with Weibull analysis. The IFSS decreased by 25% for fibers acting as the negative electrode in water without CNFs, and the impact of agglomerates on IFSS estimation is discussed. Further, a 187% IFSS increase was achieved for fibers undergoing a two-stage A-CNF EPD approach. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：41 / 47
页数：7
相关论文
共 50 条
  • [1] Functionalized single-walled carbon nanotubes for carbon fiber-epoxy composites
    Bekyarova, Elena
    Thostenson, Erik T.
    Yu, Aiping
    Itkis, Mikhail E.
    Fakhrutdinov, Danylo
    Chou, Tsu-Wei
    Haddon, Robert C.
    JOURNAL OF PHYSICAL CHEMISTRY C, 2007, 111 (48): : 17865 - 17871
  • [2] Effects of electrophoretically deposited carbon nanofibers on the interface of single carbon fibers embedded in epoxy matrix
    Schaefer, Joseph D.
    Rodriguez, Alejandro J.
    Guzman, Mauricio E.
    Lim, Chee-Sern
    Minaie, Bob
    CARBON, 2011, 49 (08) : 2750 - 2759
  • [3] Modifying the carbon fiber-epoxy matrix interphase with graphite nanoplatelets
    Qin, Wenzhen
    Vautard, Frederic
    Drzal, Lawrence T.
    Yu, Junrong
    POLYMER COMPOSITES, 2016, 37 (05) : 1549 - 1556
  • [4] ROLE OF FIBER MATRIX INTERPHASE IN CARBON FIBER-EPOXY COMPOSITE IMPACT TOUGHNESS
    YING, L
    SAMPE QUARTERLY-SOCIETY FOR THE ADVANCEMENT OF MATERIAL AND PROCESS ENGINEERING, 1983, 14 (03): : 26 - 33
  • [5] Effect of fiber surface treatment on the incorporation of carbon nanotubes and on the micromechanical properties of a single-carbon fiber-epoxy matrix composite
    Munoz-Velez, M. F.
    Valadez-Gonzalez, A.
    Herrera-Franco, P. J.
    EXPRESS POLYMER LETTERS, 2017, 11 (09): : 704 - 718
  • [6] Enhancing mechanical strength of carbon fiber-epoxy interface through electrowetting of fiber surface
    Chen, Xiaoming
    Wen, Kaiqiang
    Wang, Chunjiang
    Cheng, Siyi
    Wang, Shuo
    Ma, Hechuan
    Tian, Hongmiao
    Zhang, Jie
    Li, Xiangming
    Shao, Jinyou
    COMPOSITES PART B-ENGINEERING, 2022, 234
  • [7] Modifying the carbon fiber-epoxy matrix interphase with silicon dioxide nanoparticles
    Qin, Wenzhen
    Vautard, Frederic
    Askeland, Per
    Yu, Junrong
    Drzal, Lawrence
    RSC ADVANCES, 2015, 5 (04) : 2457 - 2465
  • [8] Basalt fiber-epoxy laminates with functionalized multi-walled carbon nanotubes
    Chen, Wei
    Shen, Hongbin
    Auad, Maria L.
    Huang, Changzheng
    Nutt, Steven
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (08) : 1082 - 1089
  • [9] ROLE OF FIBER/MATRIX INTERPHASE IN CARBON FIBER-EPOXY COMPOSITE IMPACT TOUGHNESS.
    Ying, Lincoln
    S.A.M.P.E. quarterly, 1983, 14 (03): : 26 - 33
  • [10] MICROBUCKLE PROPAGATION IN CARBON FIBER-EPOXY COMPOSITES
    SUTCLIFFE, MPF
    FLECK, NA
    ACTA METALLURGICA ET MATERIALIA, 1994, 42 (07): : 2219 - 2231
12345