Precipitation Behavior of a Maraging Stainless Steel

被引:3
|
作者
Jiang, Yue [1 ]
Ai, Ying Ying [1 ]
Wang, Qi Ting [1 ]
机构
[1] Harbin Univ Sci & Technol, Coll Appl Sci, Harbin, Peoples R China
来源
关键词
Maraging stainless steel; Thermodynamic calculation; Precipitation; Ageing treatment;
D O I
10.4028/www.scientific.net/AMR.567.92
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The changes of precipitation phases and matrix structures in Fe-13Cr-7Ni-4Mo-4Co-2W maraging stainless steel at different temperature were studied by using the Thermo-Calc software. The research was on the microstructures and precipitation behaviors of the maraging stainless steel, the performance is investigated through solution and aging treatment by TEMand SADP. The calculation results were in good agreement with the experiments, which demonstrated that when maraging stainless steel was treated in high temperature, the Laves-Fe2Mo precipitates became totally dissolved as the temperature was above 1050 degrees C, and about 8% of R phase was found during aging. The calculation provides a guiding significant to the establishment of reasonable heat treatment process and the development of new materials.
引用
收藏
页码:92 / 95
页数:4
相关论文
共 50 条
  • [1] Understanding the effect of cobalt on the precipitation hardening behavior of the maraging stainless steel
    Tian, Jialong
    Zhou, Gang
    Wang, Wei
    Hu, Qingmiao
    Jiang, Zhouhua
    Yang, Ke
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 6719 - 6728
  • [2] Investigation of precipitation in a new maraging stainless steel
    Stiller, K
    Danoix, F
    Bostel, A
    APPLIED SURFACE SCIENCE, 1996, 94-5 : 326 - 333
  • [3] PHASE TRANSFORMATIONS AND PRECIPITATION HARDENING IN MARAGING STAINLESS STEEL.
    Pawlak, Stanislaw
    Karp, Jan
    Archiwum Hutnictwa, 1980, 25 (04): : 629 - 650
  • [4] Precipitation Behaviors of a New Antibacterial Maraging Stainless Steel for Medical Instruments
    Zhang, H. W.
    Xu, Y. L.
    Chen, L. J.
    Wang, X. W.
    Wu, Z. Y.
    Li, S.
    Li, J.
    Xiao, X. S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (08): : 3753 - 3761
  • [5] Precipitation Behaviors of a New Antibacterial Maraging Stainless Steel for Medical Instruments
    H. W. Zhang
    Y. L. Xu
    L. J. Chen
    X. W. Wang
    Z. Y. Wu
    S. Li
    J. Li
    X. S. Xiao
    Metallurgical and Materials Transactions A, 2018, 49 : 3753 - 3761
  • [6] Fracture behavior of additively manufactured corrax maraging stainless steel
    Zhao, Xiaojie
    Gao, Yang
    Zhao, Kai
    Liu, He
    HELIYON, 2024, 10 (13)
  • [7] Hot Deformation Behavior and Microstructure Evolution of the Maraging Stainless Steel
    Wei, Hao
    Zhang, Weina
    Zhang, Huimin
    Chen, Zejin
    Yan, Xinyue
    Cao, Guangming
    STEEL RESEARCH INTERNATIONAL, 2024,
  • [8] Effect of aging temperature on the precipitation behavior and mechanical properties of Fe-Cr-Ni maraging stainless steel
    Zhang, C.
    Wang, C.
    Zhang, S. L.
    Ding, Y. L.
    Ge, Q. L.
    Su, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 806
  • [9] Development of maraging stainless steel
    Yang, Zhi-Yong
    Liu, Zhen-Bao
    Liang, Jian-Xiong
    Sun, Yong-Qing
    Li, Wen-Hui
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2008, 29 (04): : 1 - 7
  • [10] Direct evidence and kinetics of Cu precipitation in the austenite phase of a maraging stainless steel
    Zhou, Tao
    Spartacus, Gabriel
    Li, Xiaoqing
    Guehairia, Sonia
    Fischer, Tim
    Blankenburg, Malte
    Hedstrom, Peter
    MATERIALS & DESIGN, 2025, 252