Pore Characteristics of Lotus-Type Porous Cu-Fe and Cu-Cr Alloys Fabricated by Unidirectional Solidification

被引：1

作者：

Kim, Sang-Wook ^{[1
]}

Wang, Yue ^{[1
]}

Jung, Taek-Kyun ^{[1
]}

Jin, Changhyun ^{[1
]}

Choung, Joonmo ^{[2
]}

Lee, Ji-Woon ^{[1
]}

Hyun, Soong-Keun ^{[1
]}

机构：

[1] Inha Univ, Dept Mat Sci & Engn, Incheon 22212, South Korea

[2] Inha Univ, Dept Naval Architecture & Ocean Engn, Incheon 22212, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2018年 / 18卷 / 03期

关键词：

Lotus-Type Porous Metal; Alloying Element; Pore Characteristics; COPPER; MORPHOLOGY; VELOCITY; METALS;

D O I：

10.1166/jnn.2018.14984

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Lotus-type porous Cu-Fe and Cu-Cr with long cylindrical pores was fabricated by centrifugal casting under hydrogen atmosphere and the effect of alloying elements on pore characteristics of lotus-type porous Cu was investigated. For the lotus type porous Cu-Fe alloy, the porosity slightly decreased and the average pore diameter slightly increased with increasing Fe content. For the lotus-type porous Cu-Cr alloy, the porosity sharply decreased and the average pore diameter drastically increased with an increase in the Cr content. From these results, it was found that the pore evolution and growth are affected by alloying element and this leads to the change in the pore characteristics of lotus-type porous Cu-Fe and Cu-Cr alloys.

引用

页码：2262 / 2265

页数：4

共 50 条

[1] Effect of solidification velocity on pore morphology of lotus-type porous copper fabricated by unidirectional solidification
Hyun, SK
Nakajima, H
MATERIALS LETTERS, 2003, 57 (21) : 3149 - 3154
[2] Effect of gas pressure on pore structure and morphology of lotus-type porous Cu-Cr alloy
Jin, Qing-Lin, 1600, Editorial Office of Transactions of Materials and Heat Treatment (35):
[3] Sound absorption characteristics of lotus-type porous copper fabricated by unidirectional solidification
Xie, ZK
Ikeda, T
Okuda, Y
Nakajima, H
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 386 (1-2): : 390 - 395
[4] Effect of Zn on Pore Characteristics in Lotus-Type Porous Cu
Lee, Ji-Woon
Kim, Hyung-Tae
Kim, Sang-Wook
Jung, Taek-Kyun
Jin, Changhyun
Choung, Joonmo
Kim, Changjae
Chung, Soonwan
Hyun, Soong-Keun
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2018, 18 (03) : 2227 - 2230
[5] Effect of gas pressure on pore distribution of lotus-type porous magnesium fabricated by unidirectional solidification
Key Laboratory for Advanced Materials Processing Technology, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
Zhongguo Youse Jinshu Xuebao, 2007, 2 (200-206):
[6] Characteristic of absorbing sound in lotus-type porous copper fabricated by unidirectional solidification
Xie, ZK
Ikeda, T
Okuda, Y
Nakajima, H
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2004, 68 (03) : 185 - 190
[7] Compressive and Corrosion Properties of Lotus-Type Porous Mg-Mn Alloys Fabricated by Unidirectional Solidification
Canxu Zhou
Yuan Liu
Huawei Zhang
Xiang Chen
Yanxiang Li
Metallurgical and Materials Transactions A, 2020, 51 : 3238 - 3247
[8] Compressive and Corrosion Properties of Lotus-Type Porous Mg-Mn Alloys Fabricated by Unidirectional Solidification
Zhou, Canxu
Liu, Yuan
Zhang, Huawei
Chen, Xiang
Li, Yanxiang
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (06): : 3238 - 3247
[9] Pore characteristics of Lotus-Type Porous Copper Fabricated by Centrifugal Casting
Sang-Wook Kim
Yun-Soo Lee
Ji-Woon Lee
Seong-Sik Lim
Taek-Kyun Jung
Soong-Keun Hyun
Metals and Materials International, 2020, 26 : 660 - 667
[10] Pore characteristics of Lotus-Type Porous Copper Fabricated by Centrifugal Casting
Kim, Sang-Wook
Lee, Yun-Soo
Lee, Ji-Woon
Lim, Seong-Sik
Jung, Taek-Kyun
Hyun, Soong-Keun
METALS AND MATERIALS INTERNATIONAL, 2020, 26 (05) : 660 - 667

← 1 2 3 4 5 →