Finite element analysis of deformation behavior of Aluminium-Copper alloys

被引：4
|
作者：
Rao, J. Babu [1 ]
Kamaluddin, Syed [2 ]
Rao, J. Appa [3 ]
Sarcar, M. M. M. [1 ]
Bhargava, N. R. M. R. [1 ]
机构：
[1] Andhra Univ, Coll Engn, Visakhapatnam 530003, Andhra Pradesh, India
[2] GITAM, Coll Engn, Visakhapatnam 530045, Andhra Pradesh, India
[3] RVR & JC Coll Engn, Guntur 522019, India
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 04期
关键词：
FLOW; FRICTION; STRESS; METALS;
D O I：
10.1016/j.matdes.2008.06.060
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Cylindrical Aluminium-Copper alloy samples with initial aspect ratios of 1.0 and 1.5 were upset between flat platens in lubricated and dry conditions to predict the metal flow. Friction factors were determined using ring compression tests. Lubrication minimized the barreling of lateral free surface. Microstructure reveals that pancacking was restricted with finer grain structure in alloy with higher copper concentration. Microhardness studies reveal the non uniform deformation within the specimen. The stress values obtained from FE analysis were compared with calculated stresses from strain measurement of grids at mid-plane using Vision system and found to be in close proximity. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1298 / 1309
页数：12
相关论文
共 50 条
  • [1] Chlorination of aluminium-copper alloys
    De Micco, G.
    Pasquevich, D. M.
    Bohe, A. E.
    THERMOCHIMICA ACTA, 2007, 457 (1-2) : 83 - 91
  • [2] SEGREGATION IN ALUMINIUM-COPPER ALLOYS
    ADAMS, DE
    JOURNAL OF THE INSTITUTE OF METALS, 1949, 75 (10): : 809 - &
  • [3] DISLOCATION DAMPING IN ALUMINIUM-COPPER ALLOYS - A QUANTITATIVE ANALYSIS
    DEY, BN
    ACTA METALLURGICA, 1966, 14 (10): : 1357 - &
  • [4] Hot tearing in aluminium-copper alloys
    Viano, D
    StJohn, D
    Grandfield, J
    Cáceres, C
    LIGHT METALS 2005, 2005, : 1069 - 1073
  • [5] The constitution of aluminium-copper alloys.
    Guillet, L
    COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES, 1905, 141 : 464 - 467
  • [6] Spray forming of aluminium-copper alloys
    Grant, P.S., 1600, (A134):
  • [7] DOUBLE REFLEXION IN ALUMINIUM-COPPER ALLOYS
    SILCOCK, JM
    ACTA CRYSTALLOGRAPHICA, 1956, 9 (01): : 86 - 86
  • [8] The copper-rich aluminium-copper alloys.
    Stockdale, D
    JOURNAL OF THE INSTITUTE OF METALS, 1922, 28 : 273 - U23
  • [9] SURFACE ANALYSIS OF ETCHED AND ANODISED ALUMINIUM-COPPER ALLOYS.
    Datta, A.
    Pethrick, R.A.
    Affrossman, S.
    1600, (15):
  • [10] Chromate conversion coatings on aluminium-copper alloys
    Liu, Y
    Skeldon, P
    Thompson, GE
    Habazaki, H
    Shimizu, K
    CORROSION SCIENCE, 2005, 47 (02) : 341 - 354
12345