Contrastive Studies of the Testing Method for the Bearing Capacity and Deformation Modulus of Dynamic Consolidation Backfill Foundation

The study collected a great deal of testing data, including the physical properties of soil before dynamic compaction and in-situ test and laboratory test data after dynamic consolidation, from twenty-eight engineering practices about dynamic consolidation granite residual soils(GRS) backfill foundation in power construction in Guangdong province over the past fifteen years. The backfill were classified into three types according to the fraction of soil, the corresponding foundations were classified into three types too. Base on the plate loading testing (PLT), the suitability of testing the bearing capacity and deformation modulus of dynamic Consolidation backfill foundation, by dynamic penetrating testing (DPT), standard penetrating testing (SPT) and laboratory soil testing (LST), were evaluated. The statistic relationships between SPT, DPT blow count and the bearing capacity, deformation modulus of dynamic consolidation backfill foundation were also generalized; as well as the factors influent the testing results were analyzed. And the accuracy of adopting two common region specifications to determine the bearing capacity and deformation modulus were analyzes. This article has some reference value on ground treatment detection of dynamic consolidation backfill foundation with similar engineering geological conditions.