Specific Cutting Conditions of 100Cr6 Steel Grinding and Selected Final Roughness Parameters

被引：1

作者：

Naprstkova, Natasa ^{[1
]}

Novak, Martin ^{[1
]}

Sviantek, Jan ^{[1
]}

机构：

[1] Jan Evangelista Purkyne Univ Usti Nad Labem, Fac Mech Engn, Pasteurova 7, Usti Nad Labem 40096, Czech Republic

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2020年 / 14卷 / 02期

关键词：

hardened steel; final surface; roughness; grinding;

D O I：

10.12913/22998624/113281

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Grinding of hardened steels is often an important used technology at finishing. Products made from these materials in mechanical engineering are often used, and a quality of the workpiece surface roughness after grinding is one of the important parameters that to us speaks about the quality of the machining process. The paper deals with the influence of the selected cutting conditions when grinding bearing steel 100Cr6 (EN 10027-1) on their machined surface roughness.

引用

页码：184 / 189

页数：6

共 50 条

[1] Hard Cutting and Diamond burnishing of 100Cr6 steel bearings
Liska, Janos
Liska, Katalin
Kodacsy, Janos
PRECISION MACHINING VII, 2014, 581 : 169 - 175
[2] Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools
Benga, GC
Abrao, AM
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 237 - 241
[3] Characterization of thixoforming process of 100Cr6 steel
K.P.SOLEK
A.RASSILI
J.C.PIERRET
G.VANEETVELD
Transactions of Nonferrous Metals Society of China, 2010, 20(S3) (S3) : 916 - 920
[4] Characterization of thixoforming process of 100Cr6 steel
Solek, K. P.
Rassili, A.
Pierret, J. C.
Vaneetveld, G.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S916 - S920
[5] Wear Rate of CBN Cutting Tool in Hard Turning of 100Cr6 Bearing Steel
Raczkoevi, Laszlo
PRECISION MACHINING VII, 2014, 581 : 50 - 54
[6] Performance comparison of seeded-gel and CBN grinding wheels for cylindrical plunge grinding of 100Cr6 steel
Luciano de Oliveira Arantes
Milton Luiz Polli
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
[7] Determination of the critical damage for 100Cr6 steel under hot forming conditions
Pater, Zbigniew
Tomczak, Janusz
Bulzak, Tomasz
Knapinski, Marcin
Sawicki, Sylwester
Laber, Konrad
ENGINEERING FAILURE ANALYSIS, 2021, 128 (128)
[8] Performance comparison of seeded-gel and CBN grinding wheels for cylindrical plunge grinding of 100Cr6 steel
Arantes, Luciano de Oliveira
Polli, Milton Luiz
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (11)
[9] Tribological behaviour of microindented 100Cr6 steel surfaces in dry contact conditions
Guglielmi, Pasquale
Davoodi, Farideh
Palumbo, Gianfranco
Carbone, Giuseppe
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (5-6): : 2381 - 2400
[10] Spheroidization of 100Cr6 Bearing Steel by Warm Forging
M. Vidhyasagar
G. Balachandran
Transactions of the Indian Institute of Metals, 2021, 74 : 767 - 774

← 1 2 3 4 5 →